Phoenix Contact 2701 Series Safety Controller, 8 Safety Outputs, 7.5 V

The Phoenix Contact's safety module is an output module from the inline product range designed for use in a SafetyBridge system. The safety module can be used as part of an inline station at any point within an INTERBUS, EtherCAT®, DeviceNet™, CANopen®, EtherNet/IP™, Sercos, Modbus, PROFINET or PROFIBUS system. The transmission speed of the safety module can be set to 500 kBaud or 2 Mbaud using a switch. One transmission speed must be used consistently within a station. The module has four safe digital outputs for two-channel assignment or eight safe digital outputs for single-channel assignment.

Degree of protection IP20
Protection class III
Transmission speed 500 kbps / 2 Mbps (can be switched)
Housing colour yellow