The 3M 7503 reusable half face respirator mask helps to provide protection against particles, gases and vapours when used with an approved cartridge or filter. It’s vitally important when in an environment that has harmful gases to uphold your safety and health. Coupling the dual airline respirator with the correct cartridges/filters is vital. 3M are one of the best to ensure you uphold your safety and health. This respirator is reusable as the cartridges and filters can be exchanged or disposed once used to capacity.

The 7503 respirator mask features twin lightweight filters, which can be specialised to suit your individual needs. Fitting the respirator is easy with unique head harness and a securing neck strap. Its lightweight design makes this reusable respirator a favourite for professionals, to fit and dismount swiftly between safe and contaminated areas. The Cool Flow™ valve reduces the heat build up by allowing hot air and moisture building up to escape.

Once the straps are adjusted, the face piece is fully secured to the user’s face not allowing any harmful gases or particles to be inhaled. The 7503 offers versatility for various environments and applications, with the approved cartridges and filters. This respirator and the cartridges/filters can be used in combination can be provide protections against a variety of hazards at concentrations up to 10 time the Permissible Exposure Limit (PEL).

Extremely pliable, soft silicone facepiece: Offers exceptionally high levels of user comfort and a good fit over a broad range of face shapes & sizes

3M™ Cool Flow™ Valve: The Cool Flow valve reduces heat build-up inside the respirator - even in hot and humid conditions

Built to last: Durable construction and a wide range of spare parts

Adjustable head harness: Enables the user to obtain a balanced, secure fit. Drop-down feature for easy removal during breaks

3M™ Bayonet Connection: Flexible system for connection to a wide range of 3M™ gas, vapour & particulate filters

Agricultural
Construction
Painting
Industrial Maintenance
Manufacturing

Respirators allows for a higher filtration efficiency and better fit than standard face masks. All respirators must be approved by CE/NIOSH with an assigned approval code on each respirator if you’re unsure about a respirator or a standard face mask.

The NIOSH regulates the manufacture and testing of respirators, along with cartridges, filters and supplied air systems.

As particle filters load up with the contaminant they actually become a better filter. However, they become a harder filter to breathe through. The user will notice breathing becoming too hard and will then need to change the filter.

2000 series filters fit directly to the masks. 5000 series particle filters fit to 6000 series anti-gas filters using a holding ring, ref. 501

EN140:1998

To breathe easy when working in contaminated settings, grab this respirator mask from 3M. It works in partnership with a compatible filter (766-227) to protect against vapours, gases and particles. Advanced silicone construction ensures a snug fit on your face for comfort and to prevent leaks. The unit features 3M's Cool Flow valve, which reduces heat build-up to aid breathing by minimising resistance. It also prevents the inside of the mask from becoming humid, so you stay as cool as a cucumber.

• Large size provides good coverage on the face to enhance protection
• Dual-mode head harness is easily adjustable for your convenience
• Solid exhalation valve cover for quick and easy cleaning

• Laboratories
• Agriculture
• Chemical plants

It tips the scales at approximately 135g, so it's relatively light on your face and comfortable to work in.