Got an empty hole in your control panel? Fill the gap with this blanking plug from Schneider Electric. It covers spaces left by the removal of cables, buttons or lights from the Harmony 9001K and 9001SK series. A gasket creates a tight seal between the panel and the plug to block out contaminants. This prevents dust and moisture from getting behind the scenes, which keeps your wiring and equipment in good working order. With a diameter of 30mm, this unit is ideal for protecting standard control and signalling setups.

• Low weight of 28g means it won't add strain to your panel
• Chrome plating means it's corrosion-resistant for reliable use in humid areas
• Threaded collar and ring nut keep it firmly secured

• Plant machinery
• Instrumentation
• Machine automation

Remove the ring nut from the plug, noting its orientation. Then place the gasket over the threaded portion of the plug before inserting it into the panel hole. Make sure the gasket is between the panel and the plug. Replace the ring nut on the blanking plug with the octagonal flats facing the panel.