Molex 73251 Series Edge Female SMA, 50 Ω, Straight Body Solder

To make sure your PCB and signal cable are on speaking terms, join them with this coaxial connector from Molex. You set it up by simply inserting your frequency wire into the mounting hole. The unit's robust gold plating means it stands up to corrosion in harsh settings. As it's designed for edge mounting, you can use it to clamp down the corner of your board to a panel. A straight body orientation makes it a cinch to mount without complex tools.

• Beryllium copper contact delivers high electrical conductivity

• Telecommunications networks

To get quality signals delivered to your circuit, it's recommended that you use this connector with a PCB that's 1.57mm thick.

50 Ohm SMA RF coaxial PCB mount Jack Receptacles with a teflon dielectric, gold plated centre contact and brass body with Gold plating except 800-6918 and 800-6936 which have Nickel plated bodies.

The Molex range of high- performance SMA RF Coaxial subminiature Connectors are suitable for microwave frequencies. The SMA design of threaded couplings gives uniform contact of the outer conductors to reduce reflections and attenuation at higher frequencies. High mechanical strength and durability are also ensured by the threaded SMA design.