- RS Stock No.:
- 782-4755
- Mfr. Part No.:
- D-436-36-COLD
- Brand:
- TE Connectivity
Discontinued product
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 782-4755
- Mfr. Part No.:
- D-436-36-COLD
- Brand:
- TE Connectivity
Technical Reference
Legislation and Compliance
- COO (Country of Origin):
- MX
Product Details
TE Connectivity Cold Applied In-Line Splices
Cold applied in-line splices that require no heating for installation and provide environmental sealing against moisture using a flame retardant silicone based gel sealing system and electrical isolation using a polymer outer layer. The crimp barrels of these splices are made from tin plated copper and the transparent polyvinylidene fluoride insulation sleeves have a colour coded end cap at either end. These cold applied in-line splices provide protection and sealing on all conventional MIL spec and commercial wire insulation systems.
Stock number 782-4755 is for use with a wire range of 26, 24, 22 and 20 AWG and has red colour coded caps at either end
Stock number 782-4768 is for use with a wire range of 18 to16 AWG and has blue colour coded caps at either end
Stock number 782-4759 is for use with a wire range of 14 to12 AWG and has yellow colour coded caps at either end
Stock number 782-4755 is for use with a wire range of 26, 24, 22 and 20 AWG and has red colour coded caps at either end
Stock number 782-4768 is for use with a wire range of 18 to16 AWG and has blue colour coded caps at either end
Stock number 782-4759 is for use with a wire range of 14 to12 AWG and has yellow colour coded caps at either end
Note
An AD-1381 or approved M22520/44-01 crimp tool must be used for proper installation of these devices.
Standards
Meets or exceeds the following: SAE-AMS-DTL-23053/8 (Insulation sleeve), SAE-AS81824/12
Under qualification for SAE AS81824 and AS81824/12
Under qualification for SAE AS81824 and AS81824/12
Splices
Specifications
Attribute | Value |
---|---|
Splice Type | Butt |
Wire Size | 26 → 20 AWG |
Overall Length | 36.8mm |
Insulation | Insulated |
Colour | Red |
Series | MiniSeal |
Related links
- TE Connectivity Red Tin 0.15 → 0.75 mm²
- TE Connectivity Yellow, Insulated 12 → 16 AWG
- TE Connectivity Red Tin 26 → 20 AWG
- TE Connectivity Insulated, Tin 20 → 16 AWG
- TE Connectivity Blue Tin 20 → 16 AWG
- RS PRO Butt Splice Connector White, Insulated 26 → 19 AWG
- TE Connectivity Red, Insulated 20 → 26 AWG
- RS PRO Butt Splice Connector Yellow, Insulated 26 → 22 AWG