Beha-Amprobe ULD-420-EUR Ultrasonic Leak Detector LCD Display, 2.5 in Display

This ultrasonic leak detector converts high-frequency emissions into audible signals and Visual indications to locate leaks, mechanical vibration and electrical discharge in industrial settings. It is a handheld tool designed for use in HVAC, mechanical, electrical and automation environments where ultrasonic diagnostics are required, providing a portable solution for pinpointing sources that are otherwise inaudible.

• 20kHz–90kHz detection range for diverse leak types and faults
• 2.5 in TFT-LCD with 240x320 resolution for clear signal display
• Three automatic filters to suppress up to three dominant noise frequencies
• Receiver sensitivity adjustment and three transmitter signal strengths for precise pinpointing
• 105h alkaline battery life delivering extended field operation
• IP40 protection rating and 235g weight for convenient site portability

• Suitable for locating compressed Air and non-combustible gas leaks in factory piping
• Ideal for diagnosing refrigerant and Airflow problems in HVAC systems
• Used for inspecting valves, tanks, heat exchangers and condensers for leakage
• Can be used for detecting electrical discharge and arcing in switchgear and motors
• Suitable for assessing Seals and glazing on windows, doors and vehicle glass

The receiver runs on four 1.5V AA alkaline cells while the transmitter uses two 1.5V AAA alkaline cells, with low-battery indication via a red LED.

The filter function identifies and removes up to three main noise frequencies within ±5kHz, improving signal-to-noise for accurate detection.

The unit operates between -20°C and 50°C and is intended for use below 80% relative humidity in pollution degree 2 environments.

A headphone jack provides audible converted signals while the colour TFT-LCD and a signal-level bargraph give real-time Visual feedback.