Beha-Amprobe ULD-410-EUR Ultrasonic Leak Detector LCD Display, 2.5 in Display

This ultrasonic leak detector converts high-frequency emissions from air, gas or electrical discharge into audible sound and a Visual signal for pinpointing faults in industrial settings. It is a handheld diagnostic instrument designed for inspectors in automation, electronics, electrical and mechanical fields to locate leaks and abnormal discharges where ultrasonic emissions are present or induced.

• 20 kHz–90 kHz detection range provides coverage for varied leakage sources
• 240 x 320 high-resolution LCD delivers clear Visual signal information
• Filter function removes up to three main noise frequencies for clearer readings
• Sensitivity and signal-level adjustment enable precise localisation in situ
• Operates between -20°C and 50°C for use across typical site environments
• Alkaline battery operation yields up to 105 h runtime for extended inspections

• Suitable for locating compressed Air and other non-combustible gas leaks
• Ideal for inspecting valves, tanks, pipes and heat exchanger joints
• Used for fault diagnosis on motors, machinery and mechanical assemblies
• Can be used for HVAC/R, refrigeration and Air conditioning system checks
• Suitable for industrial plumbing and facility maintenance surveys

The receiver runs on four AA alkaline cells and the transmitter uses two AAA alkaline cells, with the receiver capable of around 105 h typical runtime on alkaline batteries.

An auto-filter routine identifies and attenuates up to three dominant ultrasonic frequencies, restoring readable signal amplitude for leak detection.

A colour TFT-LCD bargraph and an adjustable earphone output present both Visual proximity cues and audible converted ultrasound tones for direction finding.

The enclosure meets IP40 protection and is rated for operation within a -20°C to 50°C temperature range and under pollution degree 2 environments.