Overview

The PBS plus is an electronic pressure switch, pressure transmitter and display in one and is available with up to two switching outputs, analogue output and IO-Link. It is set using three large pushbuttons and the display or via IO-Link. The housing can be twisted in two places - the display and the electrical connection can be optimally aligned in any mounting situation. With measuring ranges of 0.4 bar to 1,000 bar (gauge pressure), the PBS plus can be used in many different applications. It also has absolute pressure and vacuum measuring ranges.

The PBS plus is highly resistant to corrosion due to the fully welded stainless steel membrane. Process data is transmitted to the control via IO-Link as measured values in bar. The diagnostic options make it possible for temperature values to be read out in °C and minimum and maximum values for temperature and pressure to be monitored.

At a glance

Switchable switching outputs (PNP/NPN) and analogue output (current/voltage)
Scalable analogue output (5:1 turn down)
High measurement accuracy: ± 0.5%
IO-Link for transmitting process data to the control as measured values in bar
Housing can be twisted in two places (process connection/display) and display can be rotated by 180°
Common process connections, also with flush-mounted membrane

Your Benefit

Low storage costs, short delivery times, low number of variants
Reduced installation time since housing and display can be rotated at two points
Rugged design: stainless steel measuring cell
No special conversion of IO-Link process data is required - it is shown automatically as measured values in bar
Extensive diagnosis options via IO-Link (e.g. pressure peaks, ambient temperature) deliver data for predictive maintenance
Economic solution for hydrostatic level measurement (thanks to high accuracy and small measuring ranges)

Applications

Factory automation applications:
Monitoring the media supply using pressure measurement
Pressure measurement in the hydraulic system
Measuring pressure, level, and temperature in the machine hydraulics
Monitoring of the pressure in the cylinder
Monitoring

Select all	Attribute	Value
	Brand	SICK
	Pressure Reading Type	Gauge
	Minimum Pressure Reading	0bar
	Maximum Pressure Reading	100bar
	Accuracy	± 0.5 %
	Output Type	IO-Link/PNP/NPN + PNP/NPN
	Media Measured	Gaseous, Liquid
	Process Connection	G1/4 Female
	Analogue Output	IO-Link/PNP/NPN + PNP/NPN
	Electrical Connection	M12 Round Connector
	Response Time	5 ms
	Communication Protocol	IO-LINK
	Series	PBS2
	Maximum Current	600 mA
	Supply Voltage	15 → 35 V dc
	Housing Material	Buttons - TPE-E, Display Window - PC, Lower Body - Stainless Steel 304, Plastic Head - PC + ABS
	Minimum Operating Temperature	-20°C
	IP Rating	IP67
	Maximum Operating Temperature	+85°C

	Select all
	Brand SICK
	Pressure Reading Type Gauge
	Minimum Pressure Reading 0bar
	Maximum Pressure Reading 100bar
	Accuracy ± 0.5 %
	Output Type IO-Link/PNP/NPN + PNP/NPN
	Media Measured Gaseous, Liquid
	Process Connection G1/4 Female
	Analogue Output IO-Link/PNP/NPN + PNP/NPN
	Electrical Connection M12 Round Connector
	Response Time 5 ms
	Communication Protocol IO-LINK
	Series PBS2
	Maximum Current 600 mA
	Supply Voltage 15 → 35 V dc
	Housing Material Buttons - TPE-E, Display Window - PC, Lower Body - Stainless Steel 304, Plastic Head - PC + ABS
	Minimum Operating Temperature -20°C
	IP Rating IP67
	Maximum Operating Temperature +85°C

SICK PBS2 Series Pressure Sensor, 0bar Min, 100bar Max, IO-Link/PNP/NPN + PNP/NPN Output, Gauge Reading

Overview

At a glance

Your Benefit

Applications

Related links

Be the first to know about our latest products and services