onsemi FPAB30BH60B, Power Factor Pre-Regulator Circuit, 20 kHz, 253 Vrms 27-Pin, SPMIC
- RS Stock No.:
- 181-1881
- Mfr. Part No.:
- FPAB30BH60B
- Brand:
- onsemi
This product is currently unavailable to backorder.
Unfortunately, we don’t have this product in stock and it’s not available to backorder at this time.
Added
Price Each (In a Tube of 60)
£13.56
(exc. VAT)
£16.27
(inc. VAT)
| Units | Per unit | Per Tube* |
| 60 + | £13.56 | £813.60 |
| *price indicative | ||
- RS Stock No.:
- 181-1881
- Mfr. Part No.:
- FPAB30BH60B
- Brand:
- onsemi
Technical Reference
Legislation and Compliance
- COO (Country of Origin):
- CN
Product Details
The FPAB30BH60B is an advanced PFC SPM® 3 module providing a fully-featured, high-performance Boost PFC (Power Factor Correction) input power stage for consumer, medical, and industrial applications. These single-phase modules integrate optimized gate drive of the built-in IGBT to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockout, over-current shutdown, thermal monitoring, and fault reporting. These modules also feature a full-wave rectifier, and highperformance output diode for additional space savings and mounting convenience.
600 V - 30 A Single-Phase Boost PFC with Integral Gate Driver and Protection
Very Low Thermal Resistance Using Al2O3 DBC Substrate
Full-Wave Bridge Rectifier and High-Performance Output Diode
Built-in NTC Thermistor for Temperature Monitoring
Optimized for 20kHz Switching Frequency
Isolation Rating: 2500 Vrms/min.
Motion Control - Home Appliance/Industrial Motor
Very Low Thermal Resistance Using Al2O3 DBC Substrate
Full-Wave Bridge Rectifier and High-Performance Output Diode
Built-in NTC Thermistor for Temperature Monitoring
Optimized for 20kHz Switching Frequency
Isolation Rating: 2500 Vrms/min.
Motion Control - Home Appliance/Industrial Motor
Specifications
Attribute | Value |
|---|---|
| Maximum Switching Frequency | 20 kHz |
| IC Type | Power Factor Pre-Regulator Circuit IC |
| Maximum Sink Current | 5mA |
| Maximum Supply Current | 26 mA |
| Mounting Type | Through Hole |
| Package Type | SPMIC |
| Pin Count | 27 |
| Dimensions | 44.2 x 27 x 5.7mm |
| Height | 5.7mm |
| Length | 44.2mm |
| Maximum Operating Supply Voltage | 253 Vrms |
| Maximum Operating Temperature | +150 °C |
| Minimum Operating Supply Voltage | 187 Vrms |
| Width | 27mm |
| Minimum Operating Temperature | -40 °C |