Microchip Technology KSZ8081RNDCA-TR, IEEE 802.3 Ethernet Transceiver, 24-Pin QFN

  • RS Stock No. 177-2820
  • Mfr. Part No. KSZ8081RNDCA-TR
  • Brand Microchip
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

The KSZ8081 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable. The KSZ8081 is a highly-integrated PHY solution.

Ethernet transceiver
MII interface support (KSZ8081MNX)
RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option to input a 50MHz reference clock (KSZ8081RNB)
RMII back-to-back mode support for a 100Mbps copper repeater
MDC/MDIO management interface for PHY register configuration
Programmable interrupt output
LED outputs for link and activity status indication
On-chip termination resistors for the differential pairs
Baseline wander correction
HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option
Auto-negotiation to automatically select the highest linkup speed (10/100Mbps) and duplex (half/full)

Specifications
Attribute Value
Standard Supported IEEE 802.3
Number of Channels per Chip 1
Typical Data Rate 100Mbit/s
Integrated CDR Yes
Mounting Type Surface Mount
Package Type QFN
Pin Count 24
Dimensions 4 x 4 x 0.83mm
Height 0.83mm
Length 4mm
Maximum Operating Temperature +70 °C
Width 4mm
Minimum Operating Temperature 0 °C
Available to back order for despatch 03/06/2020
Price Each (On a Reel of 1000)
£ 0.654
(exc. VAT)
£ 0.785
(inc. VAT)
Units
Per unit
Per Reel*
1000 +
£0.654
£654.00
*price indicative
Related Products
Low Voltage Differential Signaling, or LVDS, is an ...
Description:
Low Voltage Differential Signaling, or LVDS, is an electrical signaling system that can run at very high speeds over cheap, twisted-pair copper cables. Applications: Firewire, SATA, SCSI.
Description:
The MC14521B consists of a chain of 24 flip-flops with an input circuit that allows three modes of operation. The input will function as a crystal oscillator, an RC oscillator, or as an input buffer for an external oscillator. Each flip-flop divides the frequency of the previous flip-flop by two, ...
LAN8720A-CP-TR | RMII 10/100 Ethernet Transceiver ...
Description:
LAN8720A-CP-TR | RMII 10/100 Ethernet Transceiver
A range of Ethernet communications controllers, transceivers and ...
Description:
A range of Ethernet communications controllers, transceivers and switching ICs.