From Molex the 33A-100-10 data wiring tester, designed to check the integrity of 2, 3 and 4 pair UTP and STP channels. With a unique 3-in-1 design the sturdy tester features built-in modular jack connectors for USOC, 568A and 568B wiring sequences.

The robust multi-function cable tester comprises of two handheld parts, the master unit and the remote unit. This provides a convenient method for end-to-end testing of pre-installed cabling. By connecting the master and the slave unit to each end of the cable the tester automatically verifies the correct wiring sequence. A continuously sequencing LED display gives a clear visual indication of any shorts opens, reversals and mis-wire within the wiring system

Powered by a 9-volt alkaline battery this portable tester is an essential piece of test equipment for any design, installation or test engineer’s toolbox

• Built-in modular jacks on both units for testing USOC, 568A and 568B cabling
• Verification of correct wiring sequence
• Pin-point accuracy of cable continuity and sequencing of 1, 2, 3 and 4 pair shielded and unshielded twisted pair cabling
• The LED display provides a clear view and visual indication of mis-wires, shorts, open circuit and reversed wiring
• Manufactured from high-quality impact resistant materials
• A compact and lightweight device
• Master and remote units conveniently snap and lock together when not in use
• Proximity switch disconnects the battery when not in use saving valuable power.
• Requires a 9 volt alkaline battery see part number 826-4435

The Molex 33A-100-10 wiring tester can be used in any applications where UTP and STP cabling is or is going to be installed. Ensuring structured data cables are wired correctly is essential as incorrect wiring can be extremely costly to rectify. Some of the most common applications and environments are

• Data centres
• Schools and colleges
• Factories and warehouses
• Office blocks
• Hospitals and laboratories
• Manufacturing sites

This network cable tester by Molex Premise Networks is a versatile tool designed to verify the integrity of 1-, 2-, 3-, and 4-pair UTP or STP channels. With a unique 3-in-1 design and comprehensive testing capabilities, this battery-powered tester is essential for anyone working with cabling systems.

• Rugged and lightweight design
• Built-in modular jacks for USOC, 568A and 568B wiring sequences
• Battery-powered for convenient portability
• End-to-end testing for installed cabling
• Continuously-sequencing LED display for quick error detection
• Snap and lock mechanism for easy storage
• Durable nylon carry case available as an optional accessory

• Verifying wiring errors on 2-, 3-, and 4-pair UTP and STP channels
• Testing from the punch down block to the wall plate
• Ideal for use by designers, installers, and testers of cabling systems

Yes, it can detect these errors immediately with its LED display.

Yes, the tester provides a diagnostic readout for immediate error detection.

Yes, the 9 volt alkaline battery comes with the tester for your convenience.