Fluke 28EX Handheld Digital Multimeter, True RMS, 10A ac Max, 10A dc Max, 1000V ac Max - UKAS Calibrated

RS Stock No.:: 759-6851
Mfr. Part No.:: FLUKE 28 IIEX
Brand:: Fluke

Fluke 28EX Handheld Digital Multimeter, True RMS, 10A ac Max, 10A dc Max, 1000V ac Max - UKAS Calibrated

Subtotal (1 unit)**

£1,649.50

(exc. VAT)

£1,979.40

(inc. VAT)

2 In stock for delivery within 3 working days*

* Delivery dates may change based on your chosen quantity and delivery address.

FREE delivery for orders over £50.00

Not available for guaranteed pre 9am/10am delivery

Units	Per unit
1 +	£1,649.50

**price indicative

RS Stock No.:: 759-6851
Mfr. Part No.:: FLUKE 28 IIEX
Brand:: Fluke

Fluke 28II Ex Intrinsically Safe True RMS Digital Multimeter

The Fluke 28II Ex is the most rugged intrinsically safe digital multimeter in the world. This one device equips you with all the testing and troubleshooting power you need, wherever you go. It meets your needs inside or outside ATEX zones 1, 2, 21 or 22. It means that there is no need to carry different meters for different areas. There is no need to worry about crossing through an Ex-required zone with a non-Ex rated instrument.

All the measurement functions of our most popular industrial DMMs

One tool equips you with all the testing and troubleshooting power you need wherever you go––inside or outside ATEX zones 1,2,21, or 22. No need to carry different meters for different areas, or worry about crossing through an Ex-required zone with a non-Ex rated instrument.

Features and Benefits:

• Ex certification allows you to operate this digital multimeter into most Ex rated areas

• Tested for drops of up to 3 m

• Dustproof per IEC60529 IP6x

• Waterproof per IEC60529 IPx7

• 4 1/2 digit mode for precise measurements (20 000 Counts)

• True RMS ac voltage and current for accurate measurement on non-linear signals

• Measures up to 1000 V and 10 A ac and dc (note that Ex zones require reduced measurements)

• Low pass filter ensures accurate voltage and frequency measurements on variable speed motor drives (VSDs)

• Frequency to 200 kHz and % duty cycle to help you diagnose VSDs and switching power supplies

• Resistance, continuity and diode test

• 10 000 μF capacitance range for components and motor caps

• Conductance measurements for high resistance or leakage tests

• Min/Max-Average and Peak capture to record transients and variations automatically

• Relative mode to remove test lead interference on resistance measurements

• Auto and manual ranging for maximum flexibility

• Input Alert protects you by chirping and flashing Lead when leads are plugged into the wrong inputs

• Important extras keep you productive all day long in less than optimal conditions.

• Backlit keypad buttons provide extra visibility in poorly lit areas, even when you are wearing full PPE

• Large display digits and 2-level bright white backlight also increases visibility

• Long battery life – 400 hours typical without backlight (Alkaline)

• Access to the separate battery compartment makes it easy to change batteries or fuses without jeopardizing instrument calibration.

28 II Ex safety and regulatory compliance

• ISA-82.02.01

• CAN/CSA-C22.2 No. 61010-1-04 /UL61010-1:2004, and TUV 61010-1:2001

• CE

Group and Category

28II Ex I.S Certification: IECEx Ex ia IIC T4 Gb, Ex ia IIIC T130 °C Db, Ex ia I Ma

Attribute	Value
Multimeter Type	Handheld
Display Type	Digital
Model Number p	28EX
Functions Measured	AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Diode, Duty Cycle, Frequency, Resistance, Temperature
Calibrated	UKAS
Absolute Maximum AC Current Measurement	10A ac
Absolute Maximum Resistance Measurement	50MΩ
Absolute Maximum DC Current Measurement	10A dc
Absolute Maximum AC Voltage Measurement	1000V ac
Absolute Maximum DC Voltage Measurement	1000V dc
Absolute Maximum Temperature Measurement	+1090°C
Absolute Maximum Capacitance Measurement	9.999F
True RMS	Yes
Maximum Frequency	200kHz
AC Current Measurement Resolution	0.01A ac
DC Current Measurement Resolution	0.01A dc
Resistance Measurement Resolution	10kΩ
AC Voltage Measurement Resolution	1V ac
DC Voltage Measurement Resolution	1V dc
Temperature Measurement Resolution	0.1°C
Hazardous Area Certification	ATEX
Safety Category Level	CAT IV
Capacitance Measurement Resolution	1µF
Length	213.3mm
Width	100mm
Best AC Current Accuracy	±1% + 2 Digits
Best DC Current Accuracy	±0.2% + 4 Digits
Weight	567.8g
Minimum Operating Temperature	-15°C
Height	45.7mm
Best Resistance Measurement Accuracy	±1% + 3 Digits
Maximum Operating Temperature	+50°C
Battery Type	AAA
Safety Category Voltage	600V
Best Temperature Measurement Accuracy	±1% + 10 Digits
Best Capacitance Measurement Accuracy	±1% + 2 Digits
Best AC Voltage Accuracy	±2% + 20 Digits
Best DC Voltage Accuracy	±0.1% + 1 Digit
Dimensions	213.3 x 100 x 45.7mm