Fluke 750 Series calibrators measure volts, mA, RTDs, thermocouples, frequency and ohms to test sensors, transmitters and other instruments. They source/simulate volts, mA, thermocouples, RTDs, frequency, ohms and pressure to calibrate transmitters. They can also: power transmitters during test, using loop supply with simultaneous mA measurement; measure/source pressure; create and run automated as-found/as-left procedures to satisfy quality programs or regulations; record and document results.
Fluke 750 Series calibrators can hold up to a full week of downloaded procedures and calibration results. They use features such as Autostep, custom units, user-entered values during test, one-point and two-point switch testing, square root DP flow testing and programmable measurement delay. These instruments have a bright white dual display (3 settings) and multi-lingual interface (English, French, German, Spanish, Italian). They read both sourced and measured parameters simultaneously.

Calibrate temperature, pressure, voltage, current, resistance and frequency
3 operating modes: measure; source; simultaneous measure/source
Easy-to-follow, menu-driven display which guides users through tasks
Graphical display bright enough for readings to be seen in any light condition

The Fluke-753 (744-2524 ) and Fluke-754 (744-2527 ) share common features and capabilities but the Fluke-754 has, additionally, integrated HART communication functions, enabling users to monitor, control and calibrate HART instrumentation.

BC7240 battery charger
Li-on BP7240 battery pack
DPCTrack 2™ Sample Software
Instruction manual
NIST-traceable calibration report and data
Three sets of TP220 test probes with three sets of "extended tooth" alligator clips
Two sets AC280 hook clips
C799 Soft Field Case
USB communication cable, Fluke 754HHC HART communications cable

The Fluke documenting process calibrator can source/measure volts, mA, RTDs, thermocouples, frequency and ohms to test sensors, transmitters and other instruments. It can also power transmitters during the test, using loop supply with simultaneous mA measurement. It can measure/source pressure, create and running automated as-found/as-left procedures to satisfy quality programs or regulations along with the recording and documenting results. This calibrator can hold up to a full week of downloaded procedures and calibration results. This product uses features such as autostep, custom units, user-entered values during test, one-point and two-point switch testing, square root DP flow testing and programmable measurement delay. This product is supplied with algebraic calculator (built-in), 3 sets of stackable test leads, 3 sets of TP220 test probes with 3 sets of "extended tooth" alligator clips, 2 sets of AC280 hook clips, C799 field soft case, Li-ion BP7240 rechargeable battery (up to 10 hours uninterrupted use) with gas gauge, BC7240 battery charger, USB communication cable, getting started guide, instruction manual on CD-ROM, certificate of calibration and DPC/TRACK 2 software sample (which enables upload and printing of calibration records).

Note
The Fluke-753 (744-2524 ) and Fluke-754 (744-2527 ) share common features and capabilities but the Fluke-754 has, additionally, integrated HART communication functions, enabling users to monitor, control and calibrate HART instrumentation.

Calibrate temperature, pressure, voltage, current, resistance and frequency
3 operating modes: measure, source and simultaneous measure/source
Easy to follow, menu-driven display which guides users through tasks
Graphical display bright enough for readings to be seen in any light condition
The USB interface enables 2-way communication with popular PC-based instrumentation management applications
Easy-to-use multi-lingual interface
Offers compatibility with DPCTrack2 and many other asset management software packages
operating temperature ranges between -10°C to 50°C

Process control automation
Manufacturing
Instrumentation

CE certified
CSA certified