Solartron Metrology LVDT 0°C +60°C, ±10V dc

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

OD5 Conditioning Module

External PSU used, allows OD5 case to be smaller and isolates the mains voltage to make it safer
120Va.c. or 240Va.c. operation and suitable for use with all a.c. LVDTs and most others
Wide range span and zero control with both -10 to 10V and -20 to 20mA outputs
Gain and offset adjustment fully independent
Selectable transducer excitation frequency and load resistances
Forward and reverse connection selection, saves swapping wires in the connector
Housed in a robust die cast aluminium box with a 5-pin DIN connector
Half-bridge transducers accommodated with a simple plug wiring change

Supplied with

Instructions and 5-pin DIN plug.

Linear Variable Differential Transformers (LVDT)

These devices comprise a movable nickel iron core and three coils - one for energisation and two for pick-up. They need to be driven by a sine wave to produce an output amplitude and phase directly proportional to the position of the core with respect to the pick-up coils. A phase sensitive detector is required to demodulate the output signal. The main advantages of LVDTs are;

No wear problems as with potentiometers
Infinite resolution, high accuracy and linearity
No friction introduced into the measured system
Available in ranges from ±1mm to ±50mm

Note

RS LVDT's datasheet Stock No. 232-4049 is available on request.

Specifications
Attribute Value
Input Current Range 1.1 A, 250 mA
Energising Voltage Range 90 → 264 V ac
Output Voltage Range ±10V dc
Sensitivity 400 → 2500 mV
Minimum Operating Temperature 0°C
Maximum Operating Temperature +60°C
10 In stock - FREE next working day delivery available
Price Each
£ 344.58
(exc. VAT)
£ 413.50
(inc. VAT)
Units
Per unit
1 +
£344.58
Related Products
These devices comprise a movable nickel iron core ...
Description:
These devices comprise a movable nickel iron core and three coils - one for energisation and two for pick-up. They need to be driven by a sine wave to produce an output amplitude and phase directly proportional to the position of the core with respect to the pick-up coils. A ...
When the primary winding is connected to an ...
Description:
When the primary winding is connected to an AC supply, current starts to flow in the secondary coils. The secondary coils are connected in series opposition so that two voltages have opposite phase so when the core is in the centre position then voltages of equal magnitude but opposite phase ...
The optimum series of LVDT sensors are high ...
Description:
The optimum series of LVDT sensors are high performance sensors ideal for use in process control and research applications, the 9.52 mm diameter of these sensors make them an ideal choice where space is limited. Large radial bore clearance9.52 mm body diameter Stainless steel case material IP65 ingress protection. Optimum ...
The EVAL-CN0301-SDPZ (803-1706) is an evaluation board from ...
Description:
The EVAL-CN0301-SDPZ (803-1706) is an evaluation board from Analog Devices implementing a complete adjustment-free linear variable differential transformer (LVDT) signal conditioning circuit; EVAL-CFTL-LVDT (803-1591) is the LVDT required for use with the evaluation board.The evaluation board circuit uses the AD698 LVDT Signal Conditioner IC which contains a sine wave oscillator ...