The Ambersil blue adhesive lubricant has a blue colour which instantly shows you the areas you have covered. The blue colour of the adhesive lubricant is not permanent also giving you excellent penetration, resistant to high pressures and is water resistant.

FEATURES:
Appearance – Viscous liquid
Colour – Blue
Odour – Solvent
Density – 0.80 g/cm ³ (@20°C)
Density of active product – 0.87 (@25°)
Flash point of active product – 230°C (open cup)
Dynamic viscosity active product – 1894 mPa.s (40°C)
4-ball wear – 0.25mm ²
Operating temperature -35 to +200°C

BENEFITS:
Water resistant
Works well over wide temperature range
Low coefficient friction
Reduction in stick slip
Long lasting lubrication
No stain
Safe for all metal surfaces
Safe for most rubbers, plastics and coatings, test on sensitive or stressed material

USES:
Engine assembly, handling equipment, chains, bearings, rail equipment, agricultural equipment, surface treatment, guide rails, hinges and cables.

STORAGE:
The silicone release FG can be stored at normal ambient temperatures. Aerosols should always be stored at temperatures below 50 °C

SHELF LIFE:
With the correct storage the product has a shelf life of not less than 72 months