MPN

Lathe Tool Holders & Inserts

Lathe tool holders are used to secure lathe tools in place during a range of processes, including facing, threading and boring. Lathes are devices used in areas like metalworking to rotate a workpiece. Tool holders usually attach to lathes through the tool-post. Though most lathes support tool holders, not all do. Check your lathe is compatible before choosing one.

What are the advantages of lathe tool holders?

Lathe tool holders are usually made from a tougher material than the tool itself, meaning they can effectively support a precision cutting implement. They also offer flexibility and extended functionality. They can control the angle of the tool, extend or retract it as necessary or be spring-loaded to deflect the tool if too much force is applied.

Why use lathe tool holders?

There are several additional ways in which lathe tool holders allow a greater range of use of tool bits.

They can change the angle of the tool bit.
They can change the level of overhang in the tool bit.
They can direct fluid to the work area.
They may deflect the tool bit away from the piece when an excessive load is added.

72 Products showing for Lathe Tool Holders & Inserts

1 of 4

Sort by

Compare Product Details

Results per page

In Stock Pramet DTGNR/L for Use with TN/TNM Inserts, 20 mm Height, 90 ° Approach RS Stock No. 866-0338 Mfr. Part No. DTGNR 2020 K 16 Subtotal (1 unit) £147.58(exc. VAT) £147.58/unit Quantity	Pramet	90°	-	Lathe Part	DTGNR/L	-	TN/TNM Inserts	-	-	-	-	20mm	-	-	-	25.4mm	-	9.53mm	-	-	-	-	25mm	ISO	-
In Stock Pramet, 4.76 mm Height, 95 ° Approach, 12.9 mm Length RS Stock No. 866-0486 Mfr. Part No. CNMG 120404E-M:T9335 Subtotal (1 box of 10 units) £139.50(exc. VAT) £139.50/box Quantity	Pramet	95°	-	Lathe Part	-	-	-	-	12.9mm	-	4.76mm	-	-	-	-	-	-	-	-	-	4	-	-	ISO	Diamond
In Stock Pramet DCLNR/L for Use with CN/CNM Inserts, 25 mm Height, 95 ° Approach RS Stock No. 866-0552 Mfr. Part No. DCLNR 2525 M 12 Subtotal (1 unit) £155.63(exc. VAT) £155.63/unit Quantity	Pramet	95°	-	Lathe Part	DCLNR/L	-	CN/CNM Inserts	-	-	-	-	25mm	-	-	-	-	-	12.7mm	CNM.	-	4	-	-	ISO	-
In Stock Pramet Lathe Tool Holder for Use with DCMT 11T3, 16 mm Height, 93 ° Approach, 100mm Length RS Stock No. 866-0335 Mfr. Part No. SDJCR 1616 H 11 Subtotal (1 unit) £143.18(exc. VAT) £143.18/unit Quantity	Pramet	93°	-	Lathe Part	Lathe Tool Holder	-	DCMT 11T3	-	-	100mm	-	16mm	-	-	Right	20mm	-	9.53mm	55° Rhombus	-	-	16mm	16mm	No	-
In Stock Pramet, 4.76 mm Height, 93 ° Approach, 16.5 mm Length RS Stock No. 866-0515 Mfr. Part No. TNMG 160412E-R:T9335 Subtotal (1 box of 10 units) £137.75(exc. VAT) £137.75/box Quantity	Pramet	93°	-	Lathe Part	-	-	-	20mm	16.5mm	-	4.76mm	-	Bright	-	-	-	-	-	-	Aluminium	3	-	-	ISO	Triangular
In Stock Pramet Lathe Tool Holder for Use with TN/TNM Inserts, 25 mm Height, 93 ° Approach, 125mm Length RS Stock No. 866-0562 Mfr. Part No. MTJNR 2020 K 16 Subtotal (1 unit) £150.54(exc. VAT) £150.54/unit Quantity	Pramet	93°	-	Lathe Part	Lathe Tool Holder	-	TN/TNM Inserts	-	-	125mm	-	25mm	-	-	Right	34mm	-	9.53mm	Triangular	-	3	20mm	20mm	No	-
In Stock Pramet, 4.76 mm Height, 93 ° Approach, 16.5 mm Length RS Stock No. 866-0499 Mfr. Part No. TNMG 160404E-FM:T9325 Subtotal (1 box of 10 units) £137.75(exc. VAT) £137.75/box Quantity	Pramet	93°	-	Lathe Part	-	-	-	-	16.5mm	-	4.76mm	-	-	-	-	-	9.5mm	-	-	-	3	-	-	ISO D, ISO p, ISO s, ISO m	Triangular
In Stock Pramet, 4.76 mm Height, 95 ° Approach RS Stock No. 866-0492 Mfr. Part No. CNMG 120412E-R:T9325 Subtotal (1 box of 10 units) £157.50(exc. VAT) £157.50/box Quantity	Pramet	95°	-	Lathe Part	-	-	-	-	-	-	4.76mm	-	-	-	-	-	-	-	-	-	4	-	-	ISO p, ISO m, ISO s, ISO D	-
In Stock Pramet, 4.76 mm Height, 93 ° Approach, 6.5 mm Length RS Stock No. 866-0382 Mfr. Part No. WNMG 060408E-M:T9325 Subtotal (1 box of 10 units) £143.75(exc. VAT) £143.75/box Quantity	Pramet	93°	-	Lathe Part	-	-	-	-	6.5mm	-	4.76mm	-	-	-	-	-	-	-	-	-	-	-	-	ISO s, ISO m, ISO D, ISO p	-
In Stock Pramet Lathe Tool Holder for Use with WNMG 0604, 25 mm Height, 95 ° Approach, 150mm Length RS Stock No. 866-0408 Mfr. Part No. PWLNR 2525 M 0604 Subtotal (1 unit) £155.63(exc. VAT) £155.63/unit Quantity	Pramet	95°	-	Lathe Part	Lathe Tool Holder	-	WNMG 0604	-	-	150mm	-	25mm	-	-	Right	-	-	9.53mm	80° Trigon	-	-	25mm	25mm	No	-
In Stock Pramet Sclcr/L for Use with CCMT 09T3, 16 mm Height, 95 ° Approach, 150mm Length RS Stock No. 866-0332 Mfr. Part No. S16M-SCLCR 09-A Subtotal (1 unit) £186.35(exc. VAT) £186.35/unit Quantity	Pramet	95°	-	Lathe Part	Sclcr/L	-	CCMT 09T3	-	-	150mm	-	16mm	-	-	-	-	-	9.53mm	CC	-	-	14.5mm	15mm	ISO	-
In Stock Pramet for Use with XLCFN 26, 90 ° Approach, 90mm Length RS Stock No. 866-0565 Mfr. Part No. 26-DU 2020 Subtotal (1 unit) £295.63(exc. VAT) £295.63/unit Quantity	Pramet	90°	-	Lathe Part	-	-	XLCFN 26	-	-	90mm	-	-	-	-	-	-	-	-	-	-	-	20mm	20mm	ISO	-
In Stock Pramet, 4.76 mm Height, 95 ° Approach, 12.9 mm Length RS Stock No. 866-0477 Mfr. Part No. CNMG 120408E-FM:T9325 Subtotal (1 box of 10 units) £157.50(exc. VAT) £157.50/box Quantity	Pramet	95°	-	Lathe Part	-	-	-	-	12.9mm	-	4.76mm	-	-	-	-	-	-	-	-	-	4	-	-	ISO	Diamond
Stocked by manufacturer Eclipse for Use with Magnetic Chucks, 30 mm Height, 60mm Length RS Stock No. 269-6557 Mfr. Part No. 950 Subtotal (1 pair) £202.90(exc. VAT) £202.90/pair Quantity	Eclipse	-	-	Lathe Part	-	-	Magnetic Chucks	-	-	60mm	-	30mm	-	-	-	-	-	-	-	-	-	-	-	No	-
In Stock Pramet for Use with WNMG 0604, 9 mm Height, 95 ° Approach, 180mm Length RS Stock No. 866-0401 Mfr. Part No. A20Q-PWLNR 0604 Subtotal (1 unit) £372.23(exc. VAT) £372.23/unit Quantity	Pramet	95°	-	Lathe Part	-	-	WNMG 0604	-	-	180mm	-	9mm	-	-	Right	35mm	-	9.52mm	80° Trigon	Steel	-	18mm	18mm	No	-
In Stock Pramet, 3.47 mm Height, 90 ° Approach, 16.5 mm Length RS Stock No. 136-8720 Mfr. Part No. TN 16ER200M:T8030 Subtotal (1 pack of 5 units) £131.88(exc. VAT) £26.376/unit Quantity	Pramet	90°	-	Lathe Part	-	-	-	-	16.5mm	-	3.47mm	-	-	-	-	-	-	-	-	-	-	-	-	No	Triangular
Stocked by manufacturer Dormer, 4.76 mm Height, 95 ° Approach, 12.9 mm Length RS Stock No. 728-888 Mfr. Part No. CNMG 120412E-RM:T9415 Subtotal (1 pack of 10 units) £7.96(exc. VAT) £7.96/pack Quantity	Dormer	95°	-	Insert	-	-	-	4.76mm	12.9mm	-	4.76mm	-	-	1.2mm	-	-	12.7mm	-	-	Carbide	-	-	-	ISO	Rhombic
In Stock Pramet Lathe Tool Holder for Use with TPMR 1103, 20 mm Height, 91 ° Approach, 20mm Length RS Stock No. 866-0641 Mfr. Part No. S20Q-CTFPR 11 Subtotal (1 unit) £221.03(exc. VAT) £221.03/unit Quantity	Pramet	91°	-	Lathe Part	Lathe Tool Holder	-	TPMR 1103	-	-	20mm	-	20mm	-	-	-	-	-	6.35mm	Triangular	-	-	-	-	No	-
In Stock Pramet, 90 ° Approach, 4.1 mm Length RS Stock No. 866-0372 Mfr. Part No. LFMX 4.1-.20SNM2:T8330 Subtotal (1 box of 10 units) £189.50(exc. VAT) £189.50/box Quantity	Pramet	90°	-	Lathe Part	-	-	-	-	4.1mm	-	-	-	Bright	-	-	-	-	-	-	Cobalt Steel	-	-	-	ISO p, ISO s, ISO m, ISO D	-
In Stock Pramet, 3.97 mm Height, 93 ° Approach, 11.6 mm Length RS Stock No. 866-0464 Mfr. Part No. DCMT 11T304E-FM:T9325 Subtotal (1 box of 10 units) £147.50(exc. VAT) £147.50/box Quantity	Pramet	93°	-	Lathe Part	-	-	-	-	11.6mm	-	3.97mm	-	-	-	-	-	9.5mm	-	-	-	4	-	-	ISO s, ISO m, ISO D, ISO p	Diamond

Lathe Tool Holders & Inserts

What are the advantages of lathe tool holders?

Why use lathe tool holders?

72 Products showing for Lathe Tool Holders & Inserts

Popular Searches

Related links