Phoenix Contact brings you the M12 SACC-MSD series of SPEEDCON connector. The SPEEDCON connector offers you a faster locking-system, saving you on the amount of installation time. The SACC M12 series is flexible, robust and versatile and built to withstand unstable environments.

• A high degree of protection, rated at IP 67. Operates at an ambient temperature between -40°C to +85 °C, ideal for industrial environments.

• Screw connection, widely compatible with different conductors. The wires can be connected with or without the use of ferrules.

• Zin die-cast, nickel-plated knurls material. Sealed with NBR.

• IEC 61076-2-101 regulated.

• Overvoltage category 2 degree of protection

• Several industrial automation applications where a stable and secure wire connection is a must.

Save on installation time with this handy connector from Phoenix Contact. It lets you make a quick and secure connection between an actuator cable and a control cabinet and is ideal for on-site assembly.
For maximum packing efficiency on your circuit board, the small device is space-saving without compromising on power delivery. Its screw technology accepts a wide range of wire diameters, so it's a versatile choice. This connector is compatible with cables ranging in diameter from 26 to 22AWG (American Wire Gauge) with ferrule, and 24 to 20AWG without ferrule. High insulation resistance of over 100MΩ provides excellent protection from electrical shock and also substantially reduces the dissipation of electricity.
As this connector is highly protected against environmental factors, it's suitable for harsh industrial applications. You can use it safely in the field and in conditions where moisture and dirt may be present, such as industrial automation applications.

• IP67 (ingress protection) rated connection that, when correctly joined, is waterproof and dust-tight
• Operating temperature range of -40°C to +85°C
• Conforms to the RoHS (Restriction of Hazardous Substances) directive, meaning it contains minimal levels of hazardous substances
• Meets the ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 electrostatic control standards, so it won't damage equipment via electrostatic discharge