Hirschmann Test & Measurement 5A Black Grabber Clip, 60V dc Rating - 3.5mm Tip Size, 4mm Probe Socket Size

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Hirschmann Test & Measurement Grabber Clip

The Hirschmann Test & Measurement black grabber clip is a clamp-type, test probe with rotating grip jaws and a flexible shaft. The grip jaws have a special form that allows clamping of pins and wires up to a maximum of 4mm. It has a voltage rating of 30VAC and 60VDC and current rating of 5A.
Warning:
Should not be used for testing circuits of more than 50VAC. While testing live circuits, under no circumstances should the fuse rating exceed the rating quoted for any of the test probes.

Features and Benefits

Contact resistance is 50mohm
Nickel grip jaws
PF insulation material
Probe socket size
Spring steel contact
Tip size of 3.5mm

Certifications

ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007
IEC 1010 part 2-031
UL94 V-0

Specifications
Attribute Value
Colour Black
Current Rating 5A
Voltage Rating 60V dc
Contact Material Steel
Tip Size 3.5mm
Probe Socket Size 4mm
Insulation Material PF
Length 158mm
69 In stock - FREE next working day delivery available
Price Each
£ 6.61
(exc. VAT)
£ 7.93
(inc. VAT)
Units
Per unit
1 - 4
£6.61
5 - 9
£6.13
10 +
£5.61
Related Products
Length: 80.5 mm Crocodile clip with unbreakable insulation ...
Description:
Length: 80.5 mm Crocodile clip with unbreakable insulation on all sides Clamping range up to 9.5 mm bolt diameter The flat section of the clamping jaws made from tin-plated brass (fine wire-gripping surface) allows fine wires to be connected Closed against IEC probe on all sides in normal position in ...
Clamp-type test probe with rotating gripper and flexible ...
Description:
Clamp-type test probe with rotating gripper and flexible shaft. The gripper has been specially shaped so that pins and wires up to a maximum diameter of 4mm can be connected without slipping off. Suited for cable sizes 0.25 mm2 to 1.5mm2. Maximum outer cable diameter 4mm. Meets requirements of IEC ...
Micro test clip that accepts a 0.64mm socket ...
Description:
Micro test clip that accepts a 0.64mm socket (stock-no. 775-754 for adaptor leads).,The clip features a rotating clip jaw with an extremely thin shaft that can be bent to 35° to reach awkward test points.,Suitable for SMD components and packed contact points (1.27mm IC pitch).
Safety clamp-type test probe with rotating grip jaws ...
Description:
Safety clamp-type test probe with rotating grip jaws and flexible shaft The special shape of the grip jaws allows pins and wires up to a maximum Ø 4 mm to be clampedØ 4 mm socket connector made from brass For sliding sleeve and rigid sleeve systems Colour: black or red. ...