Serial Peripheral Interface (SPI) with Multi-I/O
Clock polarity and phase modes 0 and 3
Double Data Rate (DDR) option
Quad peripheral Interface (QPI) option
Extended Addressing: 24- or 32-bit address options
Serial Command subset and footprint compatible with S25FL-A, S25FL1-K, S25FL-P, S25FL-S and S25FS-S SPI families
Multi I/O Command subset and footprint compatible with S25FL-P, S25FL-S and S25FS-S SPI families
Read
Commands: Normal, Fast, Dual I/O, Quad I/O, DualO,QuadO, DDR Quad I/O.
Modes: Burst Wrap, Continuous (XIP), QPI
Serial Flash Discoverable Parameters (SFDP) for configuration information.
Program Architecture
256 Bytes Page Programming buffer
3.0 V FL-L Flash Memory
Program suspend and resume
Erase Architecture
Uniform 4 KB Sector Erase
Uniform 32 KB Half Block Erase
Uniform 64 KB Block Erase
Chip erase
Erase suspend and resume
100,000 Program/Erase Cycles, minimum
20 Year Data Retention, minimum
Security features
Status and Configuration Register Protection
Four Security Regions of 256 bytes each outside the main
Flash array
Legacy Block Protection: Block range
Individual and Region Protection
Individual Block Lock: Volatile individual Sector/Block
Pointer Region: Non-Volatile Sector/Block range
Power Supply Lock-down, Password, or Permanent protection of Security Regions 2 and 3 and Pointer Region
Technology
65 nm Floating Gate Technology
Single Supply Voltage with CMOS I/O
2.7 V to 3.6 V
Packages (all Pb-free)
8-pin SOIC 208 mil (SOC008) — S25FL128L only
WSON 5 x 6 mm (WND008) — S25FL128L only
WSON 6 x 8 mm (WNG008) — S25FL256L only
16-pin SOIC 300 mil (SO3016)
BGA-24 6 x 8 mm
5 x 5 ball (FAB024) footprint
4 x 6 ball (FAC024) footprint