Schneider Electric ClimaSys CV Series Filter Fan, 145 → 253 V ac, AC Operation, 300 m³/h @ 50 Hz, 350 m³/h @ 60

The Schneider Electric ClimaSys forced vent fan has filtered airflow of 300m³/h and supply voltage rating of 230VAC. It is ideal for installations where the ambient temperature is lower than the desired temperature inside the enclosure. It requires a high protection rating. The surrounding environment is relatively clean, allowing air to enter the enclosure. It is an efficient thermal-management system that extends the service life of your equipment. The external temperature must not exceed 35°C and must be more than 5°C lower than the temperature required in the enclosure. It has a face height of 170mm, face width of 150mm and installation depth of 62mm.
Kit includes:
1 outlet grille front
1 axial motor
2 protective grille on the front and rear surfaces
1 filter front of axial motor
1 cut-out template
1 power cord

Bear in mind pressure losses caused by the outlet element (grille with filter, ventilation louvre or simple opening) when determining the fan flow rate
Storage temperature ranges between -40°C and 70°C
Noise level ranges between 46dB and 49dB
Faston connector termination type

IP54 rated