Microchip ENC28J60-I/SP, Ethernet Controller, 10Mbps, Serial-SPI, 3.3 V, 28-Pin SPDIP
- RS Stock No.:
- 698-8981P
- Mfr. Part No.:
- ENC28J60-I/SP
- Brand:
- Microchip
Currently unavailable
We don’t know if this item will be back in stock, it is being discontinued by the manufacturer.
- RS Stock No.:
- 698-8981P
- Mfr. Part No.:
- ENC28J60-I/SP
- Brand:
- Microchip
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Microchip | |
| Physical Network Type | 10BaseT | |
| Host Interface | Serial-SPI | |
| IC Type | Controller IC | |
| Communication Mode | Full Duplex, Half Duplex | |
| Data Rate | 10 Mbps, 100 Mbps, 1000Mbps | |
| Standard Supported | IEEE 802.3 | |
| Mounting Type | Through Hole | |
| Package Type | SPDIP | |
| Pin Count | 28 | |
| DMA Support | Yes | |
| Typical Operating Supply Voltage | 3.3 V | |
| Dimensions | 35.56 x 8.51 x 3.81mm | |
| Minimum Operating Temperature | -40 °C | |
| Maximum Operating Temperature | +85 °C | |
Select all | ||
|---|---|---|
Brand Microchip | ||
Physical Network Type 10BaseT | ||
Host Interface Serial-SPI | ||
IC Type Controller IC | ||
Communication Mode Full Duplex, Half Duplex | ||
Data Rate 10 Mbps, 100 Mbps, 1000Mbps | ||
Standard Supported IEEE 802.3 | ||
Mounting Type Through Hole | ||
Package Type SPDIP | ||
Pin Count 28 | ||
DMA Support Yes | ||
Typical Operating Supply Voltage 3.3 V | ||
Dimensions 35.56 x 8.51 x 3.81mm | ||
Minimum Operating Temperature -40 °C | ||
Maximum Operating Temperature +85 °C | ||
ECN28J60 10Base-T Ethernet Controllers
The ENC28J60 from Microchip is a great stand-alone ethernet controller. ENC28J60 is a 10BASE-T controller in a small form factor SOIC package with 28 pins. Featuring bandwidth of 10Mbps and onboard MAC & PHY, this controller is great for a range of applications. Microchips ethernet controllers also contain internal DMA for faster memory copying and a max speed of 25Mhz.
Features and Benefits:
- 10BASE-T
- Integrated MAC and PHY
- 10Mbps bandwidth
- IEEE 802.3 compatible
- SPI interface with clock speeds up to 25Mhz
- Supports MAC Unicast, Multicast and Broadcast packets
- PHY loopback mode and programmable outputs
Applications:
- Security
- Instrumentation
- Home control
- Building automation
- Industrial automation
- VoIP
PHY and MAC?
PHY stand for 'Physical layer'. A physical layer is the first layer in an OSI stack. PHY layer will define physical and electrical characteristics of the network.
MAC is the abbreviation for 'Medium Access Control' and is the second layer in the OSI stack. The MAC is responsible for sending and receiving RF frames.
MAC is the abbreviation for 'Medium Access Control' and is the second layer in the OSI stack. The MAC is responsible for sending and receiving RF frames.
Daughter boards
Ethernet Communications - Microchip