Microchip LAN9252I/ML, Ethernet Controller, 100Mbps MDI, MDIX, MII, RMII, Host Bus, 3.3 (Max.) V, 64-Pin QFN

  • RS Stock No. 178-5356
  • Mfr. Part No. LAN9252I/ML
  • Brand Microchip
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

LAN9252 EtherCAT® Slave Controllers

The LAN9252 device from Microchip is a 2/3 port EtherCAT® slave controller with dual integrated Ethernet PHYs, each of which contain a full-duplex 100BASE-TX transceiver. The LAN9252 supports HP Auto MDI-X that allows the use of direct connect or cross-over LAN cables. 100BASE-FX is supported via an external fiber transceiver. Included is a 3 port EtherCAT® slave controller with 4K bytes of Dual Port memory (DPRAM), 4 SyncManagers, 3 Fieldbus Memory Management Units (FMMUs) and a 64-bit Distributed Clock. The LAN9252 supports 4 Process Data Interfaces - SPI/SQI, HBI and a 16 Bit Digital IO.

Features

2/3-port EtherCAT® Slave Controller with 3 Fieldbus Memory Management Units (FMMUs) and 4 SyncManagers
Interfaces with most 8/16-bit Embedded Controllers; can also interface with 32-bit Embedded Controllers with an 8/16-bit bus
Dual integrated Ethernet PHYs with HP Auto-MDIX
Cable diagnostic support
100BASE-FX support via an External Transceiver
1.8V to 3.3V variable voltage I/O
Integrated 1.2V Regulator for single 3.3V operation

Ethernet Communications - Microchip

Specifications
Attribute Value
Physical Network Type 10BaseT, 100BaseTX
Host Interface Host Bus
Network Interface MDI, MDIX, MII, RMII
Communication Mode Full Duplex, Half Duplex
Data Rate 100Mbps
Loopback Mode Internal
Standard Supported ANSI X3.263, IEEE 802.3, IEEE 802.3u
Mounting Type Surface Mount
Package Type QFN
Pin Count 64
Auto-Negotiation Yes
DMA Support Yes
Typical Operating Supply Voltage 3.3 (Max.) V
Dimensions 9 x 9 x 0.95mm
Height 0.95mm
Maximum Operating Temperature +85 °C
Length 9mm
Minimum Operating Temperature -40 °C
Width 9mm
Available to back order for despatch 13/03/2020
Price Each (In a Tray of 260)
£ 7.20
(exc. VAT)
£ 8.64
(inc. VAT)
Units
Per unit
Per Tray*
260 +
£7.20
£1,872.00
*price indicative
Related Products
Micrel 10/100Base-TX MAC/PHY Controllers offer the perfect solution ...
Description:
Micrel 10/100Base-TX MAC/PHY Controllers offer the perfect solution for adding high throughput, cost effective Ethernet connectivity.
LAN91C111-NU | Microchip LAN91C111-NU, Ethernet Controller, 10 Mbps, ...
Description:
LAN91C111-NU | Microchip LAN91C111-NU, Ethernet Controller, 10 Mbps, 100 Mbps MII, EISA, ISA, 3.3 V, 128-Pin TQFP
The 7100A device is an Ethernet controller SoC ...
Description:
The 7100A device is an Ethernet controller SoC featuring an 'un-attackable' hardware network engine for preventing network attacks such as flooding, spoofing and injection. The W5200 device does not have the on-chip microcontroller and needs to be connected to an external host via an SPI serial bus. i MCU W7100A ...
The KSZ9031 reduces board cost and simplifies board ...
Description:
The KSZ9031 reduces board cost and simplifies board layout by using on-chip termination resistors for the four differential pairs and by integrating an LDO controller to drive a low-cost MOSFET to supply the 1.2V core. Single-chip 10/100/1000Mbps Ethernet transceiver KSZ9031Mxx feature GMII/MII standard interface with 3.3V/2.5V/1.8V tolerant I/Os KSZ9031Rxx feature ...