Phoenix Contact, 100m Cat6a, Blue, S/FTP Shielded, Unterminated PUR Sheath

Phoenix Contact brings you a range of brilliant industrial ethernet (network) cable assemblies. These assemblies are RJ45 connectors to an M12 for all your industrial needs. The NBC-MSD range of ethernet cables are Cat5 cables (100 Mbps) and come in a variety of orientations such as a straight RJ45, angled RJ45 and different cable lengths to match all of your needs. The opposite end of the RJ45 connector sits a M12. Phoenix's M12 connectors include their top of the line SPEEDCON technology to make it effortless, strong and reliable connection to another circular connector.

The NBC-MSD cables all feature an IP67 rating when mated (M connector only, not applicable to RJ45), 2-twisted cores to the pair and the colour of the sheath is a beautiful blue.

SPEEDCON is a technology installed on the M (circular connector) side of these ethernet cables. The SPEEDCON allows you to install your M12 connection in half a turn. Not only does the cable install rapidly, it provides an extra secure fitment to your mating connector for that ultimate ease of mind. SPEEDCON connections are effortless to install, simply push the M12 connector into its mating part, turn and you're set.

Network cables are designed to allow you to have the most speed and efficiency on your network through a cable. The NBC-MSD cables come pre-wired and so all that you need to do is simply plug the cable in. Please bear in mind, these cables are not your conventional cables and include an M12 connector on one end. The M12 connector simply just needs to be pushed in and locked in.

Cat 5 is a terminology that means 'category 5'. Category 5 cables are twisted pair cables that allow you to connect to network devices via cabling. Cat 5 cables are terminated by an RJ45 port on at least one of the ends and can transmit speeds of up to 100 Mbps.

GOST

Use this Ethernet cable from Phoenix Contact to make a reliable high-speed internet connection. As it's a Cat6A cable, it gives you fast transmission speeds of up to 10Gbps (gigabits per second).
This cable is unterminated, so you can customise it with the appropriate connector for your setup. Its four pairs of conductors are colour-coded for ease of identification. The pairs are shielded by an aluminium-lined foil material that prevents interference for a high-quality signal. A robust tinned copper braid provides 70% coverage for additional shielding from static noise.
Thanks to its broad operating temperature range of -40°C to +80°C in fixed installations and -20°C to +80°C in flexible installations, you can use this cable in demanding environments. Its ample length of 100m means you can cut it down to the size you need or use it for long-range connections. A low attenuation rating of 3.1dB (decibels) at 1MHz and 67.9dB at 500MHz means there's minimal signal loss over long distances.

• Foamed PE (polyethylene) insulation for electrical safety
• Outer sheath is made from wear-resistant PUR (polyurethane) for use in demanding environments
• Blue outer sheath colour for ease of identification in a colour-coded setup