2P+E

These connectors are only suitable for power coupling to a fixing point or item of plant, or for internal wiring of equipment.

UL recognised component, CSA certified, VDE

Attach solenoid valves to your pneumatic and hydraulic equipment with this Belden Hirschmann connector. With a 2P+E configuration, it's designed for use in two-phase electrical circuits. PA housing provides impact resistance and insulation to protect you from electric shocks, ensuring safe operation. The connector has an angled design, which is useful for installation in setups with limited space.

• 16A current rating makes it suitable for high-current appliances
• Wide operating temperature range of -25°C to +85°C for use in demanding conditions
• Compatible with wire diameters ranging from 4.5 to 11mm for versatility
• Comes with a central screw for secure mounting

• Machine building
• Gas plants
• Conveyor systems

This unit has an operating voltage of 230V on DC circuits and 400V on AC networks, for wide compatibility with standard equipment.

Suitable gasket to provide IP65 sealing, RS stock number 156-4729. Supplied in bags of 10

UL recognised component, CSA certified, VDE

DIN 43650-A

Type A DIN 43650 Hirschmann

A comprehensive range of cable sockets, appliance connector bases and accessories typically for use with solenoid valves on pneumatic and hydraulic equipment. The inner connector can be rotated through 90° increments so the gland can be positioned in all four directions. Housing material is glass-filled nylon making them impact resistant.,All Hirschmann appliance connectors feature terminals that can be screwed onto bare or ferruled conductors, or will accept crimp ring/fork terminals under the head of the screw.,All are supplied complete with centre retaining screw, while plug bases are solder terminated and supplied with fixing screws. Suitable gasket to provide IP65 sealing, stock-no. 156-4729. Supplied in bags of 10