Unavailable
RS will no longer stock this product.
- RS Stock No.:
- 174-3703
- Mfr. Part No.:
- IP01
- Brand:
- XinaBox
Technical Reference
Legislation and Compliance
Product Details
- COO (Country of Origin):
- CN
IP01 – USB Programming Interface (FT232R)
This xChip is an interface programmer module, based on the FT232R by FTDI Limited. The FT232R offers USB to Asynchronous Serial Data (UART) interface, allowing the module to communicate with a personal computer, in a very simple way. It is also equipped to power and program other modules via a USB A connector.
The IP01 is required for programming the range of core xChips over the USB serial bridge provided by the FT232R.
The IP01 is unable to program the CC03 and CS11, whereas the IP02 is able to do so.
The IP01 can also provide power to the circuit and, additionally can be used to debug/communicate using the serial port, during development.
The IP01 is required for programming the range of core xChips over the USB serial bridge provided by the FT232R.
The IP01 is unable to program the CC03 and CS11, whereas the IP02 is able to do so.
The IP01 can also provide power to the circuit and, additionally can be used to debug/communicate using the serial port, during development.
Product Features
● Based on the FT232R from FTDI Limited
● USB A connector for simple connectivity without the need of a cable
● Programming interface for core xChips such as CW01, CR01 and CC01
● Equipped with switches that allow the user to switch serial and programming configurations.
● RGB LED for programming indicators.
● USB A connector for simple connectivity without the need of a cable
● Programming interface for core xChips such as CW01, CR01 and CC01
● Equipped with switches that allow the user to switch serial and programming configurations.
● RGB LED for programming indicators.
Compatible xChips
Applications
● Serial programming of xChips
● Serial interface for debugging
● Serial data monitoring
● USB-serial Internet link for IoT devies
● Serial interface for debugging
● Serial data monitoring
● USB-serial Internet link for IoT devies
Product Specifications
● Single chip USB to asynchronous serial data transfer interface
● Entire USB protocol handled on the chip. No USB specific firmware programming required.
● Fully integrated 1024 bit EEPROM for storing device descriptors
● Data transfer rates from 300 baud to 3 Mbaud
● 128 byte receive buffer and 256 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
● Unique USB FTDIChip-ID™ feature
● UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
● FIFO receives and transmits buffers for high data throughput
● Device supplied pre-programmed with unique USB serial number
● UART signal inversion option
● Low operating and USB suspend current
● Low USB bandwidth consumption
● UHCI/OHCI/EHCI host controller compatible
● USB 2.0 Full Speed compatible
● -40°C to 85°C extended operating temperature range
● Entire USB protocol handled on the chip. No USB specific firmware programming required.
● Fully integrated 1024 bit EEPROM for storing device descriptors
● Data transfer rates from 300 baud to 3 Mbaud
● 128 byte receive buffer and 256 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
● Unique USB FTDIChip-ID™ feature
● UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
● FIFO receives and transmits buffers for high data throughput
● Device supplied pre-programmed with unique USB serial number
● UART signal inversion option
● Low operating and USB suspend current
● Low USB bandwidth consumption
● UHCI/OHCI/EHCI host controller compatible
● USB 2.0 Full Speed compatible
● -40°C to 85°C extended operating temperature range