Fluke i30s Current Probe & Clamp, With RS Calibration
- RS Stock No.:
- Mfr. Part No.:
RoHS Status: Not Applicable
- COO (Country of Origin):
i30s 30A High Resolution, High Bandwidth Oscilloscope Current Probe
The i30 may be used in conjunction with bench and portable oscilloscopes for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement.
Hall effect sensing of a.c. and d.c. current
Power LED warns of low battery by flashing
Zero adjust knob to accommodate offsets
The wide, flat frequency response means this probe exhibits a fast response when measuring current pulses
2.0m flying lead terminated with 50Ω BNC plugs
Designed to meet EN61010-1, EN61010-2-032 installation CAT III 300V
Withstands overloads to 500A
Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc and frequencies below 1 kHz.
Alkaline PP3 battery, 4mm shrouded plug adaptor and operators manual.
Buy Fluke products and claim another Fluke product free.
Between September 1, 2020 and December 15, 2020 customer who purchase a Fluke product (inc. Fluke Networks) have the opportunity to claim a free product through the Fluke website with the original proof of purchase, invoice, or receipt. The product can be claimed by visiting the Fluke website - www.fluke.co.uk/freefluke. There are six levels of free tools to claim. They are separated based on the value of the qualifying purchase, starting at as little as only £100. For each level there is a fixed range of products to claim, based on the value of the original purchase.
|Maximum Conductor Size||19mm|
|Safety Category||CAT III 300 V|
|Safety Category Level||CAT III|
|Model Number p||I30S|
|Best Accuracy||±1% + 2 mA|
|Safety Category Voltage||300V|
|Bandwidth||DC to 100 kHz|