Lapp UNITRONIC LiYCY Control Cable, 7 Cores, 0.75 mm², Screened, 50m, Grey PVC Sheath, 18 AWG

From Lapp, the Unitronic LiYCY series of data cables are DIN colour coded, and ideal for low frequency applications. These data or signal cables are used for computers and electronic control devices, and are screened to minimize electrical interference. The cable also features small dimensions and outer diameter, which makes it suitable for fixed installations where space saving is a concern.

The Unitronic LiYCY cable is flame retardant and suitable for use in dry or damp rooms.

Features and Benefits

• Core insulation with PVC base
• Cores stranded in layers
• DIN colour code
• Shield braid made from tinned wires
• Transparent outer sheath made from special PVC-based mixture
• Flame-retardant in accordance with VDE 0472, part 804, test type B (IEC 332.1)
• Operating temperature with occasional flexing: -5°C to +70°C
• Operating temperature with fixed installation: -40°C to +80°C

Applications

This CY multi-conductor cable is suitable for a variety of applications, such as;

• RS 232
• Process control
• Communications, signal & control
• Signal & broadcast

Accessories

Unitronic LiYCY cables should be used with accessories that mach its capabilities, and as such Lapp supplies a series of low-resistance screen cable glands.

• 839-5331 is an M16 Skintop EMC Cable Gland
• 839-5340 is an M20 Skintop EMC Cable Gland
• 839-5343 is an M25 Skintop EMC Cable Gland
• 839-5347 is an M32 Skintop EMC Cable Gland
• 839-5356 is an M40 Skintop EMC Cable Gland
• 839-5359 is an M50 Skintop EMC Cable Gland

DIN 47100, IEC 60332-1

This control cable by Lapp is designed with 18 AWG copper conductors and Mylar bedding material. The UNITRONIC LiYCY series ensures high performance and reliability in various applications. With a voltage rating of 250V, this cable is ideal for different setups requiring precision and efficiency.

• 18 AWG copper conductors for optimal conductivity
• Mylar bedding material for durability
• Tinned copper braid screen for reduced electrical interference
• Eca CPR certified for safety compliance
• PVC insulation material for added protection
• 0.75mm² cross-sectional area for efficient power transmission

• Suitable for use in computer systems
• Ideal for instrumentation technology applications
• Can be used for office equipment setups

Yes, it is suitable for dry or damp room environments.

No, the tinned copper braid screen ensures minimal electrical interference.

Yes, this cable is flame-retardant according to IEC 60332-1-2 standards.

The cable has a maximum operating temperature of +80 °C.

The minimum bending radius for occasional flexing is 15 times the outer diameter.

LAPP Industrial Cable

IBS cables for industrial communications and field bus in sensors / actuators.

• Peak working voltage 250V (not for power purposes)
• Test Voltage 1500V
• Temperature range -40°C to +80°C