The Microchip technology 1 channel, 1Mbit/s CAN transceiver has 8 pins and PDIP package type. This device is a high speed CAN, fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus. The Local Interconnect Network (LIN) bus supports communication in automotive networks.

• An unpowered node or brown out event will not disturb the CAN bus
• Automatic thermal shutdown protection
• Detection of ground fault (permanent dominant) on TXD input
• Externally controlled slope for reduced RFI emission
• High noise immunity due to differential bus implementation
• Implements ISO-11898 standard physical layer requirements
• Low current stand by operation
• O extended (E):-400C to 1250C
• O industrial (I):-400C to 850C
• Power on reset and voltage brown out protection
• Protection against damage due to short circuit conditions (positive or negative battery voltage)
• Protection against high voltage transients
• Suitable for 12V and 24V systems
• Temperature ranges
• Up to 112 nodes can be connected