TE Connectivity, DuraSeal Insulated, Red Crimp Bullet Connector, 0.5mm² to 1mm², 22AWG to 18AWG, 4mm Bullet diameter
- RS Stock No.:
- 718-7438P
- Mfr. Part No.:
- B-106-8401
- Brand:
- TE Connectivity
Subtotal 1 unit (supplied in a bag)*
£1.40
(exc. VAT)
£1.68
(inc. VAT)
FREE delivery for orders over £50.00
In Stock
- Plus 117 unit(s) shipping from 20 October 2025
- Plus 3,000 unit(s) shipping from 20 November 2025
- Plus 999,996,882 unit(s) shipping from 23 February 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 + | £1.40 |
*price indicative
- RS Stock No.:
- 718-7438P
- Mfr. Part No.:
- B-106-8401
- Brand:
- TE Connectivity
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | TE Connectivity | |
| Series | DuraSeal | |
| Insulation | Insulated | |
| Insulation Material | Nylon | |
| Overall Length | 30mm | |
| Gender | Female | |
| Minimum Wire Size mm² | 0.5mm² | |
| Maximum Wire Size mm² | 1mm² | |
| Minimum Wire Size AWG | 22AWG | |
| Maximum Wire Size AWG | 18AWG | |
| Bullet Diameter | 4mm | |
| Colour | Red | |
| Contact Plating | Tin | |
| Contact Material | Copper Alloy | |
Select all | ||
|---|---|---|
Brand TE Connectivity | ||
Series DuraSeal | ||
Insulation Insulated | ||
Insulation Material Nylon | ||
Overall Length 30mm | ||
Gender Female | ||
Minimum Wire Size mm² 0.5mm² | ||
Maximum Wire Size mm² 1mm² | ||
Minimum Wire Size AWG 22AWG | ||
Maximum Wire Size AWG 18AWG | ||
Bullet Diameter 4mm | ||
Colour Red | ||
Contact Plating Tin | ||
Contact Material Copper Alloy | ||
Duraseal - Bullet Terminal
Duraseal bullet terminal constructed of tin plated brass with a heat shrinkable insulation sleeve.
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².
Approvals
UL Listed