Better World
INA Bearing Insert 40 mm ID 80 mm OD GYE40-XL-KRR-B
- RS Stock No.:
- 137-1872
- Mfr. Part No.:
- GYE40-XL-KRR-B
- Brand:
- INA
Bulk discount available
Subtotal (1 unit)*
£43.29
(exc. VAT)
£51.95
(inc. VAT)
Stock information currently inaccessible - Please check back later
Units | Per unit |
|---|---|
| 1 - 4 | £43.29 |
| 5 - 9 | £41.55 |
| 10 - 24 | £40.69 |
| 25 + | £39.82 |
*price indicative
Better World
Our Better World range features products that make it easy for you to make a greener product choice you can trust. Click here to find out more.
- RS Stock No.:
- 137-1872
- Mfr. Part No.:
- GYE40-XL-KRR-B
- Brand:
- INA
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | INA | |
| Product Type | Bearing Insert | |
| Inside Diameter | 40mm | |
| Outside Diameter | 80mm | |
| Static Load Rating | 19.8kN | |
| Dynamic Load Rating | 34.5kN | |
| End Type | Sealed | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| Better World Claim | Extended Product Life, Saves Energy | |
| Better World Product | Yes | |
| Select all | ||
|---|---|---|
Brand INA | ||
Product Type Bearing Insert | ||
Inside Diameter 40mm | ||
Outside Diameter 80mm | ||
Static Load Rating 19.8kN | ||
Dynamic Load Rating 34.5kN | ||
End Type Sealed | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
Better World Claim Extended Product Life, Saves Energy | ||
Better World Product Yes | ||
Radial Insert Ball Bearings with Inner Ring
INA from Schaeffler radial insert ball bearings have the inner ring located on the shaft with two grub screws offset by 120°. This location method is suitable for bearing arrangements with a constant direction of rotation or, under low speed and load, for an alternating direction of rotation.;The grub screws are self-retaining and have a fine pitch thread with cup point for secure location of the bearings.;The GSH series bearings have an adapter sleeve and lock nut providing concentric, force locking location of the inner ring on the shaft. The result is higher speeds and quieter running than other radial bearings. ;The R seal is two zinc-coated sheet steel washers extended outwards and angled downwards with intermediate NBR part and radially preloaded seal lip. Better protection against mechanical damage.;Substantial grease reservoir due to the space between the extended and angled sheet steel washers. Used in radial insert ball bearings with inner ring extended on both sides.;The RSR seal is single-piece, zinc-coated sheet steel washer with moulded, radially preloaded NBR seal lip.;Used in radial insert ball bearings with integral adapter sleeve.
Features and Benefits
• Lower operating costs;• Reduced maintenance due to improved lubrication;• Lower heat generation;• Less noise;• Shaft diameters from 12mm to 90 mm (GYE..KRR-B);• Shaft diameters from 20 mm to 50 mm (GSH..-2RSR-B);• Adapter sleeve (GSH..-2RSR-B series)
Suffixes
KRR - Lip seals on both sides (R type seal);B - Bearing with special outer ring;2RSR - Lip seals on both sides (vulcanised)
INA
Related links
- INA Bearing Insert 40 mm ID 80 mm OD GLE40-XL-KRR-B
- INA Bearing Insert 40 mm ID 80 mm OD GE40-XL-KRR-B
- INA Bearing Insert 40 mm ID 90 mm OD GNE40-XL-KRR-B
- INA Bearing Insert 80 mm ID 140 mm OD GE80-XL-KRR-B
- INA Bearing Insert 30 mm ID 62 mm OD GLE30-XL-KRR-B
- INA Bearing Insert 25 mm ID 52 mm OD GYE25-XL-KRR-B
- INA Bearing Insert 45 mm ID 85 mm OD GLE45-XL-KRR-B
- INA Bearing Insert 55 mm ID 100 mm OD GYE55-XL-KRR-B