SKF Bearing Heater 100mm Bore Size 729659 C + TMFT 36
- RS Stock No.:
- 788-3669
- Mfr. Part No.:
- 729659C+TMFT36
- Brand:
- SKF
Discontinued
Alternative
This product is not currently available. Here is our alternative recommendation.
Each
£1,006.85
(exc. VAT)
£1,208.22
(inc. VAT)
- RS Stock No.:
- 788-3669
- Mfr. Part No.:
- 729659C+TMFT36
- Brand:
- SKF
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | SKF | |
| Supply Voltage | 230V | |
| Maximum Bore Size | 100mm | |
| Select all | ||
|---|---|---|
Brand SKF | ||
Supply Voltage 230V | ||
Maximum Bore Size 100mm | ||
RoHS Status: Not Applicable
Electric Hot Plate with FREE Bearing fitting tool kit TMFT 36
The SKF Electric Hot Plate 729659 C is designed to heat bearings and other machine components prior to installation. The thermostatically-controlled hot plate may be heated to a maximum temperature of 200°C and is suitable for bearings with a bore up to 100mm (4 inch) diameter. To retain heat and prevent dirt from contaminating a bearing, the SKF Electric Hot Plate also incorporates a removable lid.
FREE: Bearing fitting tool kit TMFT 36
The fitting tool kitis designed for quick, precise and safe mounting of bearings with bore diameters from 10 to 55mm (0.39 - 2.2 in) with outer diameter ranging from 26 to 120mm (1.0 - 4.7 in). It can also be used to mount bushings, seal rings, belt pulleys etc. The fitting tool kit TMFT 36, contains 36 impact rings, 3 impact sleeves and a dead-blow hammer packed in a carrying case. The impact rings are made of high-impact modified polyamide. The impact sleeves are made of glass fibrereinforced, high-impact modified polyamide, which is super-tough, strong and lightweight. The dead-blow hammer has nylon faces and is steel-shot loaded for maximum impact. The welded-on steel handle, with comfortable rubbergrip for good handling, absorbs shock and vibration
The fitting tool kitis designed for quick, precise and safe mounting of bearings with bore diameters from 10 to 55mm (0.39 - 2.2 in) with outer diameter ranging from 26 to 120mm (1.0 - 4.7 in). It can also be used to mount bushings, seal rings, belt pulleys etc. The fitting tool kit TMFT 36, contains 36 impact rings, 3 impact sleeves and a dead-blow hammer packed in a carrying case. The impact rings are made of high-impact modified polyamide. The impact sleeves are made of glass fibrereinforced, high-impact modified polyamide, which is super-tough, strong and lightweight. The dead-blow hammer has nylon faces and is steel-shot loaded for maximum impact. The welded-on steel handle, with comfortable rubbergrip for good handling, absorbs shock and vibration
Note
The SKF Electric Hot Plate is supplied with a fitted Schuko (CEE 7/4) two-pin plug. If a UK BS 1363 electrical plug - or other mains electrical plug is required to be fitted, the Schuko plug fitted to the Hot Plate must be removed and the alternative plug fitted by a suitably-qualified person prior to use, such as: (UK) BS1363 rubber plug 488-387 ; (FR) rubber plug 700-1094 ; (DE) Schuko rubber plug 705-0822 ; or (US and JP) nylon plug 316-0133
Related links
- SKF Bearing Heater 20mm To 300mm Bore Size TIH30M/110V + TMFT 36
- SKF Bearing Heater 100mm Bore Size 729659 C
- SKF Bearing Heater 729659 C-1
- SKF Bearing Heater 20mm To 300mm Bore Size TIH 030M/230V
- SKF Bearing Heater 60mm To 600mm Bore Size TIH 220M/MV
- SKF Bearing Heater 20mm To 300mm Bore Size TIH030M/110V
- SKF Bearing Heater 30mm To 320mm Bore Size TWIM 15/110V
- SKF Bearing Heater 20mm To 400mm Bore Size TIH 100M/MV