This is a single-direction thrust ball bearing, suitable for handling axial loads in one direction. It has a 90mm inside diameter and a 120mm outside diameter. The open-type design enhances accessibility for maintenance. Constructed from steel, it ensures durability and consistent performance under load.

• Ground bore of shaft washers allows for an interference fit
• High dynamic load rating of 59.2kN supports heavy use

• Used in mechanical assemblies requiring axial support
• Applicable in manufacturing machinery and conveyors

No, this bearing is designed solely for single-direction axial loads.

The bearing is made from high-quality bearing steel.

The limiting speed is rated at 3,800 r/min.