These bearings are designed to accommodate shaft deflection when running and will also cope with initial misalignment. The double row bearing is designed primarily to withstand radial load with a small capacity for axial load. Also available with ring seals (rubbing seals) made from oil-resistant, non-wearing synthetic rubber with steel reinforcement on both sides (Type 2RS1).

ETN9 and KTN9 are Open self-aligning bearings without a seal available in parallel or Taper bores.

2RS1TN9 are sealed (NBR) bearings packed with grease with a lithium thickener suitable for temperatures from -40°C to + 100°C. They are sealed for life, so should not be heated above 80°C before mounting and must not be washed out under any circumstances.

TN suffix denotes polyamide cage

instruction leaflet.

This ball bearing is designed for a variety of applications. With a 20mm inner diameter and a 52mm outer diameter, it features a sealed design that offers strong performance in dynamic environments. Constructed from steel, it provides durability and strength, making it suitable for both industrial and mechanical settings. Its self-aligning capability enhances its effectiveness in scenarios where shaft misalignment may occur.

• Self-aligning design accommodates shaft misalignment
• Dual seals protect against contamination and lubricant loss
• Steel construction ensures long-lasting performance
• Suitable for high-speed applications up to 9000r/min
• Rated for a static load of 4kN for demanding applications
• Double row design increases load capacity

• Suitable for machinery with alignment issues
• Used in electric motors and generators
• Effective in conveyor systems for improved reliability
• Commonly employed in agricultural equipment

Yes, it is designed to operate up to 9000r/min.

It can support static loads up to 4kN.

Yes, its sealed design prevents contamination.