This RS PRO capacitor is a general-purpose electrolytic capacitor, meaning it uses electrolytes to create electrostatic fields and store electrical energy. It's a radial type of capacitor and has both leads coming out of one side.
The product features a safety vent construction to let the gas out and prevent the capacitor from exploding when the voltage gets too high. It's a through-hole type component, which means you need to run the terminals through holes in your printed circuit board (PCB) to mount it.
This product meets Electrostatic Control Standards ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 to guarantee any risk of electrostatic discharge is reduced to a minimum. You will find electrolytic capacitors like this used to prevent voltage fluctuations in filtering devices, storing power in flash lamps and for decoupling in electric supply.

• Capacitance of 1000 μF
• Diameter of 8 mm
• Height of 16 mm
• Length of 16 mm
• Dissipation factor of 0.16
• Lead pitch of 3.5 mm
• Coefficient variance (CV) of less than or equal to 0.01 or 3 μA at 1 min leakage current
• Lifetime of 2000 h
• Maximum operating temperature of +105°C
• Minimum operating temperature of -40°C
• Through-hole mounting type
• Polarised
• Ripple current of 570 mA
• Electrolytic technology
• Tolerance of ±20%
• Voltage of 16 V DC