brands

attributes.Model_Number

attributes.Tip_Shape

attributes.For_Use_With

attributes.Tip_Size

attributes.Tip_Series

attributes.Tip_Angle

Antex 2.4 mm Soldering Iron Tip for use with Gascat 60

Antex 2.4 mm Straight Hoof Soldering Iron Tip for use with Gascat 120P

Antex 1 mm Straight Conical Soldering Iron Tip for use with Gascat 120P

Antex 3.2 mm Straight Hoof Soldering Iron Tip for use with Gascat 120P

Antex Nozzle for use with Portasol Pro II Gas Iron

Antex Hot Air Tip Soldering Iron Tip for use with Gascat 60


Soldering iron tips transfer heat from a soldering iron into solder so that it melts and can flow into the joint between two components or workpieces. They’re also sometimes referred to as ‘bits’.

To protect your soldering iron tips, you should tin your tip before and after soldering to create a protective layer between the air and the soldering iron tip. Tinning prevents oxidisation and allows for a more efficient heat transfer.

### Optimal operating temperature

Putting your soldering tips through excessive temperatures will shorten their lifespan. The temperature of the tip will decrease as the soldering iron is used more. There is the temptation to increase the idle temperature to compensate for this temperature drop – but don’t as this will shorten the life of the soldering iron tip. If you aren’t actively using your soldering iron think about turning it off or setting it to a low ‘idle’ temperature to maximise tip life.

### How do you clean a soldering iron?

To keep your tip in perfect condition you should aim to clean before, during and after use. Before you solder, ensure that you have cleaned the surfaces which are to be soldered with an alcohol wipe.

To clean your tips, use either brass wool (less abrasive) or stainless steel wool (more abrasive). Try to avoid using a sponge as doing so rapidly cycles the tip through a hot and cold cycle. Doing this repeatedly will cause metal fatigue and tip failure. Once you have cleaned the tip ensure that you cover the tip with fresh solder so as to present oxidisation.

### Using flux

When metals come into contact with oxygen an oxide layer is formed on the surface of the metal. This oxidisation prevents solder from wetting the joint correctly and impacts the quality of the solder joint. Flux dissolves this oxidisation layer.

### Reactivating your soldering iron tips

If a soldering iron tip becomes oxidised it will appear darker in colour and you may not be able to tin it. If your tip is oxidised you can use a tip activator to remove the oxidisation as it will break down the oxide layer. Once cleaned and refreshed tin the tip again to protect it from oxidisation.

### Soldering iron tip shapes

Most soldering irons have interchangeable tips that have slightly different shapes to allow for different tasks or precision levels. For example, conical tips are used for fine electronics work. Other common tip shapes include:

- bevel (aka hoof)
- chisel
- concave
- pyramid
- bent


Soldering Iron Tips

Soldering

Power Tools, Soldering & Welding

Development Tools & Single Board Computers

Raspberry Pi, Arduino, ROCK, STEM Education & Development Tools

Electronic Components, Power & Connectors

Engineering Materials & Industrial Hardware

Pneumatic Counters, Logic Controllers & Timers

Electronics Cleaners & Protective Coatings

Buy from our selection of soldering iron tips from Antex. At RS, we strive to give you the best offers from our supplier and to promptly deliver in the shortest time.

Soldering Iron Tips - Antex

Weller RTMS 002 CL MS 0.2 mm Conical Soldering Iron Tip for use with WXMPS-MS (Smart) Soldering Iron

Thermaltronics 0.4 mm Straight Conical Soldering Iron Tip

Weller RTMS 004 C MS 0.4 mm Conical Soldering Iron Tip for use with WXMPS-MS (Smart) Soldering Iron

Weller T0054488799 1.2 mm Round Soldering Iron Tip for use with WXP 90/ WTP 90/ WXP 65/ WP 65 Soldering Iron

Weller T0051612799 2 mm Micro Spade Soldering Iron Tip

Weller T0054444999 M4 Straight Soldering Iron Tip

Antex Soldering Iron Tips

8 Products showing for Antex Soldering Iron Tips

Popular Searches

Related links

Be the first to know about our latest products and services