Reamer Bits

When completing high-performance projects that require the forming of precise holes in or through materials, the sides of the hole may require additional work to ensure they are completely smooth. In this case, reamers are designed to completely smooth the hole to a high degree of accuracy.


Due to the removal of the uneven material, reaming will slightly enlarge the hole you have created, therefore making it advisable to form the initial hole fractionally smaller to allow for the reaming space – this is called the allowance. It is recommended that the drilled hole should not be enlarged by more than 5% of the drilled diameter.


Typically made from carbide or high-speed steel (HSS), these multi-edged rotary cutting tools are used in metalworking for enlarging and finishing holes to a high level of precision and accuracy.


What types of reamer are there?


At RS Components, we have both machine reamer bits and hand reamer bits. The main difference between the two is that hand reamer bits have a longer taper or lead in at the front end of the bit, which compensates for the difficulty of using hand power alone.


Straight reamer bits are used to make only minor enlargements to holes, typically ones used for the force-fitting of location dowel pins or for unthreaded shoulder bolts.


With helical/spiralled reamer bits, a clockwise reamer will pull any debris up and out of a blind hole, whereas an anti-clockwise reamer will push debris forward, which can be helpful when creating a through-hole.


A tapered reamer is used to make a tapered hole for a tapered pin, which is a self-tightening device due to the shallow angle of the taper. They are commonly used in aircraft assembly and may only be re-reamed a small number of times during an aircraft’s career.


Combination reamers have two or more cutting surfaces, cut to resemble the part’s multiple internal diameters. Using combination reamers reduces the number of separate operations as well as precisely creating relative depths and diameters.


Adjustable reamers consist of several blades along a tapered groove that can be adjusted to cover a small range of hole sizes. They are restricted to light usage due to the absence of any spiral in the flute, meaning they will only remove minimal material for each diameter setting, and cannot be used in holes that have an axial split.


...
Read more Read less

Filters

Viewing 1 - 20 of 42 products
Results per page
Description Price Shank Type Diameter Overall Length Material
RS Stock No. 394-302
BrandRS PRO
£98.00
Each
Units
Straight 19 → 21mm 180 mm HSS
RS Stock No. 394-251
BrandRS PRO
£58.00
Each
Units
Straight 9.25 → 10mm 115 mm HSS
RS Stock No. 394-295
BrandRS PRO
£73.67
Each
Units
Straight 15.25 → 17mm 165 mm HSS
RS Stock No. 394-291
BrandRS PRO
£78.33
Each
Units
Straight 17 → 19mm 170 mm HSS
RS Stock No. 394-279
BrandRS PRO
£62.33
Each
Units
Straight 11.75 → 12.75mm 130 mm HSS
RS Stock No. 394-239
BrandRS PRO
£133.17
Each
Units
Straight 21 → 23mm 85.72 mm HSS
RS Stock No. 394-267
BrandRS PRO
£58.00
Each
Units
Straight 10 → 10.75mm 125 mm HSS
RS Stock No. 394-245
BrandRS PRO
£50.67
Each
Units
Straight 7.75 → 8.5mm 100 mm HSS
RS Stock No. 394-241
BrandRS PRO
£53.17
Each
Units
Straight 8.5 → 9.25mm 105 mm HSS
RS Stock No. 394-263
BrandRS PRO
£43.83
Each
Units
Straight 6.5 → 7mm 85 mm HSS
RS Stock No. 394-285
BrandRS PRO
£71.67
Each
Units
Straight 13.75 → 15.25mm 150 mm HSS
RS Stock No. 394-273
BrandRS PRO
£44.33
Each
Units
Straight 7 → 7.75mm 90 mm HSS
RS Stock No. 394-289
BrandRS PRO
£65.83
Each
Units
Straight 12.75 → 13.75mm 145 mm HSS
RS Stock No. 188-2477
BrandRS PRO
£74.01
1 Set
Set(s)
Straight 14 mm, 18 mm, 22 mm 105 mm HSS
RS Stock No. 188-2509
BrandRS PRO
£57.80
Each
Units
Morse Taper 1in 7-1/4 in HSS
RS Stock No. 188-2502
BrandRS PRO
£35.00
Each
Units
Morse Taper 12mm 152 mm HSS
RS Stock No. 188-2505
BrandRS PRO
£53.59
Each
Units
Morse Taper 22mm 184 mm HSS
RS Stock No. 188-2508
BrandRS PRO
£35.00
Each
Units
Morse Taper 1/2in 5-15/16 in HSS
RS Stock No. 188-2501
BrandRS PRO
£31.86
Each
Units
Morse Taper 10mm 127 mm HSS
RS Stock No. 188-2504
BrandRS PRO
£43.32
Each
Units
Morse Taper 16mm 167 mm HSS
Related Products
HSS Spiral Flute straight Morse Taper shank machine ...
Description:
HSS Spiral Flute straight Morse Taper shank machine reamer for opening and finishing existing holes to H7 tolerance Suitable most ferrous and non-ferrous materials7° helix, Left Hand Spiral for excellent surface finish Manufactured to BS328 standards. HSS Morse Taper Shank Machine Reamer (B101).
The RS PRO machine reamer bit has a ...
Description:
The RS PRO machine reamer bit has a diameter of 16mm and 5 number of flutes. It has an overall length of 167mm and cut-length of 114mm. It is made of HSS and it can effortlessly fit into small holes. This RS PRO machine reamer is perfect to deburr welded ...
HSS Spiral Flute straight shank machine reamer for ...
Description:
HSS Spiral Flute straight shank machine reamer for opening and finishing existing holes to H7 tolerance Suitable for most ferrous and non-ferrous materials6° helix, Left Hand Spiral for excellent surface finish Manufactured to BS328 standard. HSS Straight Shank Machine Reamer (B901).