Countersinks

Countersink cutter drill bits are designed to fit directly into manual, electric and cordless drill driver attachments and have hexagonal or round shanks. Countersink cutters are used to create a chamfer around the rim of a pilot hole enabling the head of a countersunk screw to sit flush. Countersink cutters can also be used to remove the burr left from a drilling or tapping operation.


Types of Countersink Cutters



  • Cross-Hole Countersink Cutter: These have a hole that goes through the side of the cone that provides the cutting edge. These countersink cutters are suitable for deburring and can also be used in soft materials such as wood or plastic to create a countersunk hole. The design of these countersink cutters means that they are free from mechanical vibration or 'chatter' and they also stay in the centre.

  • Fluted Countersink cutter: These have fluted blades that produce a heavy chamfer to create the correct seating for a countersunk-head screw. Countersink cutters are available with six different cutting angles but the most common are 82° and 90°. The number of flutes on the countersink cutter can also vary.

  • Single fluted: These have less chatter or mechanical vibration than multi-fluted and are ideal for use in small holes for general-purpose countersinking, chamfering and deburring. These are designed for machine use and light portable work when operating at higher speeds.

  • Three fluted: These are designed for a chatter-free performance and are used mainly in portable applications at slower speeds. The design of these countersinks gives them a good centring ability.

  • Four fluted: These have good radial relief

  • Five Fluted: These have a rugged design and the odd number of flutes minimises chatter

  • Six fluted: These are ideal for producing fast shearing cuts


These countersink cutter drill bits are made from HSS (High-Speed Steel) which can withstand high temperatures without losing its hardness.


...
Read more Read less

Filters

Viewing 21 - 40 of 104 products
Results per page
Description Price Drill Bit Type Head Diameter Countersink Angle Number of Flutes Material Overall Length Number of Pieces Shank Diameter Shank Length
RS Stock No. 812-6012
Mfr. Part No.G2363
BrandDormer
£162.62
Each
Units
Countersink Set 6.3 mm, 8.3 mm, 10.4 mm, 12.4 mm, 16.5 mm, 20.5 mm 90° 3 HSS - 6 - -
RS Stock No. 508-9193
Mfr. Part No.05424
BrandEXACT
£27.21
Each
Units
Countersink 28mm 90° - HSS-E 84 mm 1 - -
RS Stock No. 666-7435
Mfr. Part No.G13625.0
BrandDormer
£57.31
Each
Units
Countersink 25mm 90° 3 HSS 67 mm 1 10 mm -
RS Stock No. 508-8819
Mfr. Part No.05506
BrandEXACT
£4.85
Each
Units
Countersink 6.3mm 90° 3 HSS 45 mm 1 5 mm -
RS Stock No. 508-9058
Mfr. Part No.05527
BrandEXACT
£54.15
1 Set
Set(s)
Countersink Set 6.3 mm, 8.3 mm, 10.4 mm, 12.4 mm, 16.5 mm, 20.5 mm 90° 3 HSS - 6 - -
RS Stock No. 215-423
BrandRS PRO
£10.72
Each
Units
Countersink 5mm 90° - HSS 45 mm 1 6 mm 32mm
RS Stock No. 215-445
BrandRS PRO
£23.86
Each
Units
Countersink 15mm 90° - HSS 65 mm 1 10 mm 37.5mm
RS Stock No. 666-7429
Mfr. Part No.G13612.4
BrandDormer
£23.24
Each
Units
Countersink 12.4mm 90° 3 HSS 56 mm 1 8 mm -
RS Stock No. 508-9014
Mfr. Part No.05426
BrandEXACT
£60.57
1 Set
Set(s)
Countersink Set 2 mm, 5 mm, 10 mm, 15 mm, 20 mm 90° - HSS-E - 4 - -
RS Stock No. 508-9008
Mfr. Part No.05645
BrandEXACT
£9.29
Each
Units
Countersink 16.5mm 90° 3 HSS 40 mm 1 1/4 in -
RS Stock No. 673-8697
BrandRS PRO
£65.75
1 Set
Set(s)
Countersink Set 6.3 mm, 8.3 mm, 10.4 mm, 12.4 mm, 16.5 mm, 20.5 mm 90° 3 HSS - 6 - -
RS Stock No. 508-9064
Mfr. Part No.05520
BrandEXACT
£11.49
Each
Units
Countersink 20.5mm 90° 3 HSS 63 mm 1 10 mm -
RS Stock No. 218-630
BrandRS PRO
£21.38
Each
Units
Countersink 20mm 90° 3 HSS - 1 - -
RS Stock No. 508-9042
Mfr. Part No.05641
BrandEXACT
£6.61
Each
Units
Countersink 6.3mm 90° 3 HSS 31 mm 1 1/4 in -
RS Stock No. 508-9070
Mfr. Part No.05518
BrandEXACT
£8.18
Each
Units
Countersink 16.5mm 90° 3 HSS 60 mm 1 10 mm -
RS Stock No. 215-439
BrandRS PRO
£15.43
Each
Units
Countersink 10mm 90° - HSS 48 mm 1 8 mm 30.5mm
RS Stock No. 218-589
BrandRS PRO
£14.03
Each
Units
Countersink 16mm 90° 5 HSS - 1 - -
RS Stock No. 215-489
BrandRS PRO
£14.07
Each
Units
Countersink 10mm 90° - HSS 48 mm 1 8 mm 30.5mm
RS Stock No. 218-551
BrandRS PRO
£8.09
Each
Units
Countersink 6mm 90° 3 HSS - 1 - -
RS Stock No. 562-634
BrandRS PRO
£8.65
Each
Units
Countersink 6mm 90° 5 HSS 45 mm 1 5 mm 35mm
Related Products
90° flutes for use with machines and portable ...
Description:
90° flutes for use with machines and portable tools Three-flute designed to reduce clogging, improve clearance and be chatter free Three-flute for use on metals only Five-flute for use on metal and wood.
HSS-E countersink with cylinder shaft For rust-free steels ...
Description:
HSS-E countersink with cylinder shaft For rust-free steels and + VA materials Three cutters with radial rear vent for vibration-free work For deburring, threading and weighting as per DIN 74.
From Wera this is the 846/8, 3-Flute, 8-piece ...
Description:
From Wera this is the 846/8, 3-Flute, 8-piece countersink bit set complete with a 1 / 4-inch drive suitable for power screwdrivers. The countersink set includes a Kraftform bit holding screwdriver, Rapidaptor universal bit holder, and 6 x 1 / 4-inch hex drive countersink bits which a laser etched with ...
Straight Shank Countersink with three cutters and large ...
Description:
Straight Shank Countersink with three cutters and large flutes are used for deep countersinking. The shank is in C form and can be used with a variety of bit holders Deburring of pipes and drilled holes Ideal for use on wood, ferrous and non-ferrous metals.