brands

attributes.Connector_A

attributes.Connector_A_002d_Thread_Size

attributes.Hydraulic_Fitting_Type

attributes.Connector_B

attributes.Connector_B_002d_Thread_Size

attributes.Connector_C

materials

attributes.Finish

attributes.Connector_A_002d_Thread_Standard

attributes.Connector_A_002d_Gender

attributes.Connector_B_002d_Gender

attributes.Connector_B_002d_Thread_Standard

attributes.Maximum_Operating_Pressure

attributes.Maximum_Operating_Temperature

attributes.Minimum_Operating_Temperature

Parker Hydraulic DIN Fitting, RED28L/25SOMDCF

Parker Crimped Hose Fitting Hose to ORFS, 1JC77-10-12

Parker Hydraulic DIN Fitting, EL30SCF

Parker Crimped Hose Fitting Hose, 13977-12-8

Parker Hydraulic DIN Fitting, EV18LCF

Parker Hydraulic Male Stud to G 1 Male, GE42LR1EDCF

Parker Hydraulic DIN Fitting, DA35LCF

Parker Hydraulic DIN Fitting, EL18LCF


Hydraulic fittings form part of a hydraulic system which connects hoses, pipes and tubes. There are various fittings which are used to connect the system together and help the hydraulic fluid to flow through. Hydraulic fittings, or hose fittings, are used to connect hydraulic hoses and pipes to other components such as valves and pumps.Hydraulic fittings will usually have a male and/or female connection which join to other components. The connections are usually threaded and there are several thread standards available, such as JIC, BSP and BSPP. BSP male threads will seal with BSP female threads, for example. Popular materials include plastic, brass and stainless steel fittings.

### Types of hydraulic fittings:

PlugsAdaptersCouplingsUnionsReducersElbows

### How are hydraulic fittings attached?

There are several methods used to attach a hydraulic fitting. Examples include:Compression fittings provide water tight connections by using pressure to seal the connection. They usually use a compression nut which, when tightened, removes space between the ferrule and the pipe.Threaded fittings have screw threads on both sides of the connection. They accept connections with compatible threads and screw together for a secure connection. Not all threads provide a tight seal and may benefit from additional coatings or seals.Crimped fittings require crimping of the hose to the fitting. You may require a crimping tool to achieve this.

### Thread Types

Hydraulics machines are used all across the world and there are many components used in each system. Thread types are used to help make parts easily identifiable and easy to maintain and replace. Some examples of thread standards include:NPT stands for National Pipe Thread where the threads are at a 60° angle. There is also NPT (National Pipe Taper) and NPS (National Pipe Straight).BSP fittings stands for British Standard Pipe where the angle of the threads is 55°. This standard includes BSPT (British Standard Pipe Taper) and BSPP (British Standard Parallel Pipe).Metric threads are specified by their diameter and pitch in millimetres (mm).



Hydraulic Fittings

Hydraulic Fittings & Tubing

Pneumatics & Hydraulics

Development Tools & Single Board Computers

Raspberry Pi, Arduino, ROCK, STEM Education & Development Tools

Electronic Components, Power & Connectors

Engineering Materials & Industrial Hardware

Pneumatic Counters, Logic Controllers & Timers

Electronics Cleaners & Protective Coatings

Buy Parker Fittings.Browse our latest range of Parker Fittings. Free Next Day Delivery.

Parker Fittings

Parker Hydraulic Banjo Compression Tube Fitting 3/8 in Hose to 16 mm, 14948-16-6

Parker Fittings

3068 Products showing for Parker Fittings

Popular Searches

Related links

Be the first to know about our latest products and services