Crimp Tool Positioners, Turrets & Locators

Crimp Tool Positioners are parts of a Crimping tool designed to adapt the tool frame to a particular application. Available in a wide selection of sizes and shapes locators guarantee versatility of every crimping tool. The data plate on each positioner designates which contacts the positioner accommodates for its wire size and indicates selector position. The positioners are easy to remove and replace when different connector size is required.


How easy crimping tools and positioners, turrets and locators are to use?


They are very easy to use, insert the contact pin into the hole of the crimp tool, load the wire into the contact pin, make sure it’s fully seated then and squeeze until the cycle finishes then finally check that you have a secure crimp.


How do you maintain the product?


There is very little maintenance required for this tool, keep the indenter tips free of debris and dirt.


The Importance of a High-Quality Crimp


When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and the terminal. The other is the insulation crimp which provides strain relief against vibration and tension.The electrical connection must be gas-tight without any voids between the wire strands and the terminal. If there are any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.


...
Read more Read less

Filters

Viewing 61 - 80 of 168 products
Results per page
Description Price Type Series Number of Contacts Series Number
RS Stock No. 721-1434
Mfr. Part No.1208461
£37.23
Each
Units
Assembly Tool SAC BIT M8-D10 - -
RS Stock No. 864-3416
Mfr. Part No.3-456406-3
£123.00
Each
Units
Wire Crimper - - -
RS Stock No. 865-8385
Mfr. Part No.09990000507
BrandHARTING
£165.00
Each
Units
Positioner - - -
RS Stock No. 841-8724
Mfr. Part No.14025/1AMP
BrandBulgin
£107.42
Each
Units
Positioner 14025 - 400
RS Stock No. 876-2034
Mfr. Part No.1579005-1
£12.54
Each
Units
Spring ERGOCRIMP - -
RS Stock No. 876-2065
Mfr. Part No.300389
£8.86
Each
Units
Pin CERTI-CRIMP - -
RS Stock No. 426-3261
Mfr. Part No.K1478
BrandGlenair
£95.58
Each
Units
Positioner K - -
RS Stock No. 885-9605
Mfr. Part No.127-0000-904
£10.82
Each
Units
Positioner SMP - -
RS Stock No. 864-3428
Mfr. Part No.354001-1
£342.19
Each
Units
Wire Crimper AMPLIVAR - -
RS Stock No. 168-0604
Mfr. Part No.300389
£8.86
1 Bag of 1
Bag(s)
Pin CERTI-CRIMP - -
RS Stock No. 864-6991
Mfr. Part No.1583659-1
£1,059.06
Each
Units
Hydraulic Foot Pump - - -
RS Stock No. 864-7095
Mfr. Part No.1490746-1
£1,710.89
Each
Units
Crimping Head - - -
RS Stock No. 864-7146
Mfr. Part No.122562-1
£567.14
Each
Units
Seating Tool Z-PACK - -
RS Stock No. 876-2046
Mfr. Part No.303848-2
£44.43
Each
Units
Pin - - -
RS Stock No. 865-8398
Mfr. Part No.09990000630
BrandHARTING
£35.06
Each
Units
Positioner - - -
RS Stock No. 864-7067
Mfr. Part No.1-690496-5
£195.77
Each
Units
Shear Plate - - -
RS Stock No. 864-7089
Mfr. Part No.456424-5
£151.28
Each
Units
F Crimper HDM - -
RS Stock No. 822-7638
Mfr. Part No.63800-0142
BrandMolex
£33.388
Each (In a Pack of 5)
Units
Cam Follower Roller T9999 - 63800
RS Stock No. 864-7010
Mfr. Part No.679992-1
£1,791.27
Each
Units
Crimping Head 626 - -
RS Stock No. 864-7076
Mfr. Part No.2-456135-4
£126.39
Each
Units
O Crimper - - -
Related Products
The multi-contact is an MES-CZ series, locator adjustable ...
Description:
The multi-contact is an MES-CZ series, locator adjustable crimp tool. It is suitable for crimping from 0.14 to 4mm² cables with 1mm, 1.5mm, and 3mm with Combi Tac contacts. The wire size of tool ranges between 26AWG and 22 AWG. It is used in conjunction with CT-M-CZ crimp pliers.
Lightweight design and very high density, micro Comp® ...
Description:
Lightweight design and very high density, micro Comp® is an alternative to HD DSUB with superior characteristics,A flexible alternative to MIL-STD 83513 connectors. Stainless steel Compatible with MIL-STD 83513 interfaces.
Bulgin Buccaneer 6000 series tooling and accessories suitable ...
Description:
Bulgin Buccaneer 6000 series tooling and accessories suitable for use with the 6000 series of metal and plastic circular connectors, including a gland pack covering 4-10mm diameter cables, various contact removal tools for differing connector contacts, screening clamp and crimp contact locators.
Molex T9999 Premium Grade series of tools provides ...
Description:
Molex T9999 Premium Grade series of tools provides the user with various options of high quality tooling to ensure your application is covered. A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly terminal locator wire stop holds terminals in the ...