Crimp Tool Positioners, Turrets & Locators

Crimp Tool Positioners are parts of a Crimping tool designed to adapt the tool frame to a particular application. Available in a wide selection of sizes and shapes locators guarantee versatility of every crimping tool. The data plate on each positioner designates which contacts the positioner accommodates for its wire size and indicates selector position. The positioners are easy to remove and replace when different connector size is required.


How easy crimping tools and positioners, turrets and locators are to use?


They are very easy to use, insert the contact pin into the hole of the crimp tool, load the wire into the contact pin, make sure it’s fully seated then and squeeze until the cycle finishes then finally check that you have a secure crimp.


How do you maintain the product?


There is very little maintenance required for this tool, keep the indenter tips free of debris and dirt.


The Importance of a High-Quality Crimp


When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and the terminal. The other is the insulation crimp which provides strain relief against vibration and tension.The electrical connection must be gas-tight without any voids between the wire strands and the terminal. If there are any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.


...
Read more Read less

Filters

Viewing 41 - 60 of 168 products
Results per page
Description Price Type Series Number of Contacts Series Number
RS Stock No. 721-1428
Mfr. Part No.1208432
£40.79
Each
Units
Assembly Tool SAC BIT M12-D15 - -
RS Stock No. 827-3663
Mfr. Part No.3443-82-10
Brand3M
£263.91
Each
Units
Locator 451 10 3443
RS Stock No. 827-3679
Mfr. Part No.3443-82-16
Brand3M
£263.91
Each
Units
Locator 451 16 3443
RS Stock No. 876-2166
Mfr. Part No.601077
£77.10
Each
Units
Indexing Device Bantam ROTA-CRIMP - -
RS Stock No. 864-6957
Mfr. Part No.1213860-1
£2,612.75
Each
Units
Tool Holder CERTI-CRIMP II - -
RS Stock No. 864-6954
Mfr. Part No.1673611-1
£1,177.39
Each
Units
Tool Holder CERTI-CRIMP - -
RS Stock No. 864-3557
Mfr. Part No.58422-1
£15,354.29
Each
Units
Crimping Head DYNA-CRIMP - 58422
RS Stock No. 864-6972
Mfr. Part No.690514-3
£149.95
Each
Units
Anvil AMPOMATIC - -
RS Stock No. 876-2359
Mfr. Part No.525441-4
£302.75
Each
Units
Plug Gauge - - -
RS Stock No. 864-7023
Mfr. Part No.356303-1
£1,250.44
Each
Units
Tool Holder CERTI-CRIMP - -
RS Stock No. 864-7014
Mfr. Part No.356302-1
£1,250.44
Each
Units
Tool Holder CERTI-CRIMP - -
RS Stock No. 713-4422
Mfr. Part No.09990000525
BrandHARTING
£180.24
Each
Units
Positioner Har-Speed - -
RS Stock No. 696-1642
Mfr. Part No.TA-0002-146-0001
BrandAmphenol
£30.05
Each
Units
Locator TA - -
RS Stock No. 822-7679
Mfr. Part No.63810-0102
BrandMolex
£38.34
Each
Units
Locator T9999 - 63810
RS Stock No. 426-3283
Mfr. Part No.K1476
BrandGlenair
£91.43
Each
Units
Positioner K - -
RS Stock No. 864-7017
Mfr. Part No.69082
£7,788.53
Each
Units
Crimping Head DYNA-CRIMP - -
RS Stock No. 765-9839
Mfr. Part No.14232/2/SP
BrandBulgin
£200.50
Each
Units
Positioner 6000 16 -
RS Stock No. 876-2383
Mfr. Part No.525441-5
£302.75
Each
Units
Plug Gauge - - -
RS Stock No. 803-4367
Mfr. Part No.1205655
£11.06
Each
Units
Locator CF 3000 LOC 1.0 - -
RS Stock No. 864-7026
Mfr. Part No.1673672-1
£4,558.56
Each
Units
Crimping Head - - -
Related Products
The multi-contact is an MES-CZ series, locator adjustable ...
Description:
The multi-contact is an MES-CZ series, locator adjustable crimp tool. It is suitable for crimping from 0.14 to 4mm² cables with 1mm, 1.5mm, and 3mm with Combi Tac contacts. The wire size of tool ranges between 26AWG and 22 AWG. It is used in conjunction with CT-M-CZ crimp pliers.
Lightweight design and very high density, micro Comp® ...
Description:
Lightweight design and very high density, micro Comp® is an alternative to HD DSUB with superior characteristics,A flexible alternative to MIL-STD 83513 connectors. Stainless steel Compatible with MIL-STD 83513 interfaces.
Bulgin Buccaneer 6000 series tooling and accessories suitable ...
Description:
Bulgin Buccaneer 6000 series tooling and accessories suitable for use with the 6000 series of metal and plastic circular connectors, including a gland pack covering 4-10mm diameter cables, various contact removal tools for differing connector contacts, screening clamp and crimp contact locators.
Molex T9999 Premium Grade series of tools provides ...
Description:
Molex T9999 Premium Grade series of tools provides the user with various options of high quality tooling to ensure your application is covered. A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly terminal locator wire stop holds terminals in the ...