Distribution Blocks

The primary function of a distribution block is to supply power more efficiently to a series of devices. The secondary function is to isolate short circuit incidents to prevent complete shutdown from occurring. Distribution blocks can handle a range of frequencies and currents. Using distribution blocks requires only one large wire on the input side to link each connected device back to the power source. This eliminates the need for separate wiring of each device.

What are distribution blocks used for?
Distribution blocks are used in various industries:

  • Heating/cooling for operating heaters, cooling systems and ventilation equipment.
  • Power distribution control in the form of voltage transformers, uninterrupted power supply units and distribution cabinets
  • Solar, wind and turbine as the power supply to distribute energy.
  • Electrical vehicles for charging stations.
  • Electronic automation, including elevators, lifting equipment and conveyor systems.


Types of distribution blocks
The two main types of distribution block are:

  • Bussed (enclosed) blocks, which allow for a larger input cable to be split out into smaller cables for branch circuits.
  • Independent blocks, which enable multiple individual circuits to be routed to a single location as they are not connected to each other.

...
Read more Read less

Filters

Viewing 61 - 80 of 902 products
Results per page
Description Price Number of Ways Termination Method Wire Size Housing Material IP Rating Current Rating Voltage Rating Cable CSA Length Width Height Colour Maximum Operating Temperature Minimum Operating Temperature
New
RS Stock No. 201-5255
Mfr. Part No.1045940
£0.688
Each (In a Pack of 50)
Units
2 Push In 14 AWG Polyamide IP20 17.5A 450 V 2.5mm² - - - Violet - -
New
RS Stock No. 201-4061
Mfr. Part No.1047439
£7.552
Each (In a Pack of 20)
Units
19 Push In 14 AWG Polyamide IP20 17.5A 450 V 2.5mm² - - - Orange - -
New
RS Stock No. 201-4224
Mfr. Part No.3273138
£3.138
Each (In a Pack of 10)
Units
6 Push In 12 AWG Polyamide IP20 24A 690 V 4mm² - - - Yellow - -
New
RS Stock No. 201-4173
Mfr. Part No.1046980
£5.487
Each (In a Pack of 20)
Units
13 Push In 14 AWG Polyamide IP20 17.5A 450 V 2.5mm² - - - White - -
New
RS Stock No. 201-4337
Mfr. Part No.3273182
£7.67
Each (In a Pack of 8)
Units
18 Push In 12 AWG Polyamide IP20 24A 690 V 4mm² - - - Yellow - -
New
RS Stock No. 201-4268
Mfr. Part No.3273758
£7.639
Each (In a Pack of 8)
Units
13 Push In 24 to 10 AWG Polyamide IP20 32A 800 V 0.2 → 6mm² - - - White - -
New
RS Stock No. 201-5921
Mfr. Part No.3274046
£10.528
Each (In a Pack of 8)
Units
19 Push In 10 AWG Polyamide IP20 32A 450 V 6mm² - - - Black - -
New
RS Stock No. 201-5902
Mfr. Part No.3273966
£9.541
Each (In a Pack of 8)
Units
18 Push In 10 AWG Polyamide IP20 32A 450 V 6mm² - - - Grey - -
New
RS Stock No. 201-5526
Mfr. Part No.3273324
£6.80
Each (In a Pack of 8)
Units
18 Push In 12 AWG Polyamide IP20 24A 450 V 4mm² - - - Violet - -
New
RS Stock No. 201-5891
Mfr. Part No.3002785
£4.131
Each (In a Pack of 20)
Units
12 Push In 14 AWG Polyamide IP20 17.5A 450 V 2.5mm² - - - Violet - -
New
RS Stock No. 201-5619
Mfr. Part No.3274226
£8.399
Each (In a Pack of 8)
Units
19 Push In 12 AWG Polyamide IP20 24A 690 V 4mm² - - - Violet - -
New
RS Stock No. 201-3829
Mfr. Part No.1028367
£0.963
Each (In a Pack of 50)
Units
2 Push In 10 AWG Polyamide IP20 32A 450 V 6mm² - - - Black - -
New
RS Stock No. 201-5944
Mfr. Part No.3273570
£9.541
Each (In a Pack of 8)
Units
18 Push In 24 to 10 AWG Polyamide IP20 32A 800 V 0.2 → 6mm² - - - Grey - -
New
RS Stock No. 201-5609
Mfr. Part No.3273083
£3.865
Each (In a Pack of 10)
Units
7 Push In 12 AWG Polyamide IP20 24A 690 V 4mm² - - - Pink - -
New
RS Stock No. 201-6169
Mfr. Part No.3274160
£7.67
Each (In a Pack of 8)
Units
18 Push In 12 AWG Polyamide IP20 24A 690 V 4mm² - - - Violet - -
New
RS Stock No. 201-3943
Mfr. Part No.1047447
£7.552
Each (In a Pack of 20)
Units
19 Push In 14 AWG Polyamide IP20 17.5A 500 V 2.5mm² - - - Yellow - -
New
RS Stock No. 201-5397
Mfr. Part No.1046973
£5.487
Each (In a Pack of 20)
Units
13 Push In 14 AWG Polyamide IP20 17.5A 450 V 2.5mm² - - - Grey - -
New
RS Stock No. 201-4750
Mfr. Part No.3002971
£5.002
Each (In a Pack of 20)
Units
12 Push In 14 AWG Polyamide IP20 17.5A 500 V 2.5mm² - - - Brown - -
New
RS Stock No. 201-5371
Mfr. Part No.1046992
£5.487
Each (In a Pack of 20)
Units
13 Push In 14 AWG Polyamide IP20 17.5A 500 V 2.5mm² - - - White - -
New
RS Stock No. 201-5164
Mfr. Part No.3273520
£8.399
Each (In a Pack of 8)
Units
19 Push In 26 to 12 AWG Polyamide IP20 24A 450 V 0.14 → 4mm² - - - Violet - -
Related Products
The Phoenix modular power distribution board with crosslink ...
Description:
The Phoenix modular power distribution board with crosslink interface,3 position and touch-proof and protection against polarity reversal. Its width is 405mm. Its height is 160mm Rated surge voltage is 6kV.
The Phoenix Contact PTFIX series distribution block with ...
Description:
The Phoenix Contact PTFIX series distribution block with push in connection offer a flexible distribution solution and it used NS 35/7,5, NS 35/15 mounting type. It can be used straight away and expanded as needed. It has 6 way of connection and its width is 16mm. The block can be ...
The Phoenix Contact PTFIX series distribution block with ...
Description:
The Phoenix Contact PTFIX series distribution block with push in connection offer a flexible distribution solution and it used adhesive mounting type. It can be used straight away and expanded as needed. It has 12 way of connection and its width is 36.9mm. The block can be bridged with one ...
The Phoenix contact potential distributors for marking functional ...
Description:
The Phoenix contact potential distributors for marking functional earth ground are of dimensions width: 8.3 mm, length: 100 mm. Nom. Voltage 250 VNom. Current 17.5 APush-in connection method.