Lead Frames

Filters

Viewing 1 - 6 of 6 products
Results per page
Description Price Row Spacing Contact Material Contact Plating Type
RS Stock No. 719-8810
Mfr. Part No.1544425-2
£0.024
Each (In a Pack of 100)
Units
2.54mm Phosphor Bronze Tin SIL
RS Stock No. 164-2787
Mfr. Part No.1544425-2
£0.01
Each (On a Reel of 40000)
Units
2.54mm Phosphor Bronze Tin SIL
RS Stock No. 718-5221
Mfr. Part No.1544400-1
£0.005
Each (In a Pack of 100)
Units
1.27mm Phosphor Bronze Tin SIL
RS Stock No. 164-0647
Mfr. Part No.1544400-1
£0.005
Each (On a Reel of 60000)
Units
1.27mm Phosphor Bronze Tin SIL
RS Stock No. 718-5218
Mfr. Part No.1544210-2
£0.02
Each (In a Pack of 100)
Units
2.54mm Phosphor Bronze Tin SIL
RS Stock No. 164-0646
Mfr. Part No.1544210-2
£0.01
Each (On a Reel of 25000)
Units
2.54mm Phosphor Bronze Tin SIL
Related Products
W3100 series DIL stamped IC sockets with a ...
Description:
W3100 series DIL stamped IC sockets with a low profile end and side stackable design making them ideal for use in high density circuit layouts. These W3100 DIL IC sockets have tin-plated dual wipe contacts that offer maximum contact retention at minimum cost and a large lead-in area provides easy ...
Textool™ series 2.54mm ZIP DIP sockets which incorporate ...
Description:
Textool™ series 2.54mm ZIP DIP sockets which incorporate a lever actuated zero insertion force mechanism to reduce damage to device leads. These Textool ZIP DIP sockets provide a test and burn-in interface for dual in-line packages with a 2.54mm pin spacing and are ideally suited for use in high volume ...
These sockets have precision four-fingered inner contacts for ...
Description:
These sockets have precision four-fingered inner contacts for high reliability. Precision four-finger inner contact provides concentric funnel entry for easy flat and round lead insertion "X" and "Y" Stackable Low profile Accommodates rectangular or round IC leads Non-wicking, closed bottom sleeve gives 100% protection against flux and solder contamination Recognized ...
D2 series 2.54mm IC DIP sockets with an ...
Description:
D2 series 2.54mm IC DIP sockets with an open frame design and 7.62mm row spacing. These D2 series PCB IC DIP sockets accept leads with a diameter range of 0.41 to 0.56mm and are both end and side stackable. The female contacts of these IC DIP sockets are machined and ...