RFID Modules

Filters

Viewing 1 - 20 of 54 products
Results per page
Description Price Component Type Supported Bus Interfaces Maximum Output Power Receiver Sensitivity Supply Voltage Series Dimensions Diameter Height Length Maximum Operating Temperature Minimum Operating Temperature Width
RS Stock No. 781-3061
Mfr. Part No.28340
£37.39
Each
Units
Tag USB - - - - - - - - - - -
RS Stock No. 666-6625
Mfr. Part No.28140
£37.48
Each
Units
Reader UART - - 4.5 → 5.5V - - - - 82.5mm +85°C -40°C 62.2mm
RS Stock No. 617-2000
Mfr. Part No.RWD-QT
£15.67
Each
Units
Reader/Writer TTL - - 5V - - - - 30.5mm +85°C -40°C 18mm
RS Stock No. 843-0806
Mfr. Part No.28448
£2.15
Each
Units
- - - - - - - - - - - - -
RS Stock No. 542-517
Mfr. Part No.RWD-MIFARE-OEM
£61.76
Each
Units
Reader/Writer TTL - - 5V MIFARE® - - - - - - -
RS Stock No. 617-1984
Mfr. Part No.RWD-MIFARE
£22.15
Each
Units
Reader/Writer TTL - - 4 → 6V MIFARE® - - - 30.5mm +85°C -40°C 18mm
RS Stock No. 715-4078
Mfr. Part No.CARD-ICODE
£2.00
Each
Units
Tag - - - - - - - - - - - -
RS Stock No. 715-4075
Mfr. Part No.RWD-MICODE
£23.15
Each
Units
Reader TTL - - 5V - - - - - - - -
RS Stock No. 182-206
Mfr. Part No.TRF7960RHBT
£4.61
Each
Units
Reader SPI 200mW - 2.7 → 5.5V - 212.7 x 190.5 x 31.8mm - 31.8mm 212.7mm +85°C -40°C 190.5mm
RS Stock No. 145-6292
Mfr. Part No.TRF7960RHBT
£3.268
Each (On a Reel of 250)
Units
Reader SPI 200mW - 2.7 → 5.5V - 212.7 x 190.5 x 31.8mm - 31.8mm 212.7mm +85°C -40°C 190.5mm
RS Stock No. 672-9053
Mfr. Part No.CARD-MIFARE4K
£4.91
Each
Units
Tag - - - - MIFARE® - - - - - - -
RS Stock No. 162-8433
Mfr. Part No.TRF7960ARHBT
£2.528
Each (On a Reel of 250)
Units
Tag - - - - - 5.15 x 5.15 x 0.95mm - 0.95mm 5.15mm +110°C -40°C 5.15mm
RS Stock No. 818-4910
Mfr. Part No.TRF7960ARHBT
£3.66
Each
Units
Tag - - - - - 5.15 x 5.15 x 0.95mm - 0.95mm 5.15mm +110°C -40°C 5.15mm
RS Stock No. 617-4523
Mfr. Part No.CARD-H2
£2.87
Each
Units
Tag - - - - - - - - - - - -
RS Stock No. 126-2176
Mfr. Part No.RFID-A1 (00319)
£15.67
Each
Units
Reader, Transponder, Writer I2C, SPI - - 2.5 → 3.6V RFID - - - 20.32mm +85°C -25°C 20.06mm
RS Stock No. 825-3344
Mfr. Part No.RF430CL330HCPWR
£1.068
Each (In a Pack of 5)
Units
Tag SPI - - 3 → 3.6V - 4.5 x 5.1 x 1.05mm - 1.05mm 5.1mm +85°C -40°C 4.5mm
RS Stock No. 162-8691
Mfr. Part No.RF430CL330HCPWR
£0.487
Each (On a Reel of 2000)
Units
Tag SPI - - 3 → 3.6V - 4.5 x 5.1 x 1.05mm - 1.05mm 5.1mm +85°C -40°C 4.5mm
RS Stock No. 825-3353
Mfr. Part No.RF-HDT-DVBE-N2
£1.826
Each (In a Pack of 5)
Units
Tag - - - - - - 22mm 3mm - +90°C -25°C -
RS Stock No. 921-3016
Mfr. Part No.RF-HDT-DVBE-N2
£0.956
Each (On a Reel of 1000)
Units
Tag - - - - - - 22mm 3mm - +90°C -25°C -
RS Stock No. 126-2177
Mfr. Part No.RFID-B1(000323)
£15.67
Each
Units
Reader, Transponder, Writer UART - - 2.5 → 3.6V RFID - - - 20.32mm +85°C -25°C 20.06mm
Related Products
The RFM67W-868 is a highly integrated, dual-mode 868MHz ...
Description:
The RFM67W-868 is a highly integrated, dual-mode 868MHz ISM-band transmitter module. The RFM67W module has two modes of operation: a conventional MCU controlled mode and a ’stand-alone’ mode which enables the module to download configuration and messages from an EEPROM in response to a user input. The RFM67W offers high ...
The OEM-MICODE Reader Boards are complete Read/Write system ...
Description:
The OEM-MICODE Reader Boards are complete Read/Write system for ISO14443A Mifare 1k, Mifare 4k, Ultralight and ICODE. The Boards have an integrated PCB track antenna, LEDs, TTL serial and I/O interface. Also included on the board is power supply filtering, antenna-trimming capacitor and LEDs for visual indication of card acceptance. ...
The UART-B1 is a low cost full RFID/NFC ...
Description:
The UART-B1 is a low cost full RFID/NFC read/write device with UART interface. Can operate in “host” connected mode or “stand alone” mode. Supports Mifare Classic 1k & 4k, NTAG2xx and Ultralight. Additionally, you can read serial numbers from Mifare Plus, Mifare DESfire and any transponder compatible with the ISO14443A ...
Description:
The RS232-B1 v2 is a low cost full RFID/NFC read/write device with RS232 interface that can operate in "host" connected mode or "stand alone" mode. Supports Mifare Classic 1k & 4k, NTAG2xx and Ultralight. Additionally, you can read serial numbers from Mifare Plus and Mifare DESfire. The RS232-B1 is based ...