Infineon CY7C65213-32LTXI, USB Controller, 3Mbps, USB 2.0, 3.3 V, 5 V, 32-Pin QFN
- RS Stock No.:
- 188-5345
- Mfr. Part No.:
- CY7C65213-32LTXI
- Brand:
- Cypress Semiconductor
Unavailable
RS will no longer stock this product.
- RS Stock No.:
- 188-5345
- Mfr. Part No.:
- CY7C65213-32LTXI
- Brand:
- Cypress Semiconductor
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Cypress Semiconductor | |
| Number of Transceivers | 1 | |
| Data Rate | 3Mbps | |
| Protocols Supported | USB 2.0 | |
| IC Type | Controller IC | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Typical Single Supply Voltage | 3.3 V, 5 V | |
| Mounting Type | Surface Mount | |
| Package Type | QFN | |
| Pin Count | 32 | |
| Dimensions | 5 x 5 x 0.85mm | |
| Height | 0.85mm | |
| Length | 5mm | |
| Maximum Operating Temperature | +85 °C | |
| Minimum Operating Temperature | -40 °C | |
| Width | 5mm | |
| Select all | ||
|---|---|---|
Brand Cypress Semiconductor | ||
Number of Transceivers 1 | ||
Data Rate 3Mbps | ||
Protocols Supported USB 2.0 | ||
IC Type Controller IC | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Typical Single Supply Voltage 3.3 V, 5 V | ||
Mounting Type Surface Mount | ||
Package Type QFN | ||
Pin Count 32 | ||
Dimensions 5 x 5 x 0.85mm | ||
Height 0.85mm | ||
Length 5mm | ||
Maximum Operating Temperature +85 °C | ||
Minimum Operating Temperature -40 °C | ||
Width 5mm | ||
USB 2.0 certified, Full-Speed (12 Mbps)
Support for communication driver class (CDC), personal health care device class (PHDC), and vendor device class
Battery charger detection (BCD) compliant with USB Battery Charging Specification Rev 1.2 (Peripheral Detect only)
Integrated USB termination resistors
Two-channel configurable UART interfaces
CY7C65215 supports 2-pin, 4-pin and 6-pin UART interface whereas CY7C65215A supports 2-pin, 4-pin, 6-pin and 8-pin
Data rates up to 3 Mbps
Supports flow control using CTS, RTS, DTR, DSR
Supports UART break signal
CY7C65215 supports dual channel RS232/RS422 interfaces whereas CY7C65215A supports RS232/RS422/RS485
256 bytes for each transmit and receive buffer per channel
Supports Motorola, TI, and National SPI modes
Two-channel configurable I2C interfaces
256 bytes for each transmit and receive buffer per channel
Max CapSense buttons: 8
GPIOs linked to CapSense buttons
JTAG interface: JTAG master for code flashing at 400 kHz
General-purpose input/output (GPIO) pins: 17
Configuration utility (Windows) to configure the following:
UART/I2C/SPI/JTAG
Driver support for VCOM and DLL
Windows: 10, 8.1, 8,7, Vista, XP, CE
Mac OS-X: 10.6, and later versions
Linux: Kernel version 2.6.35 onwards
Android: Gingerbread and later versions
Support for communication driver class (CDC), personal health care device class (PHDC), and vendor device class
Battery charger detection (BCD) compliant with USB Battery Charging Specification Rev 1.2 (Peripheral Detect only)
Integrated USB termination resistors
Two-channel configurable UART interfaces
CY7C65215 supports 2-pin, 4-pin and 6-pin UART interface whereas CY7C65215A supports 2-pin, 4-pin, 6-pin and 8-pin
Data rates up to 3 Mbps
Supports flow control using CTS, RTS, DTR, DSR
Supports UART break signal
CY7C65215 supports dual channel RS232/RS422 interfaces whereas CY7C65215A supports RS232/RS422/RS485
256 bytes for each transmit and receive buffer per channel
Supports Motorola, TI, and National SPI modes
Two-channel configurable I2C interfaces
256 bytes for each transmit and receive buffer per channel
Max CapSense buttons: 8
GPIOs linked to CapSense buttons
JTAG interface: JTAG master for code flashing at 400 kHz
General-purpose input/output (GPIO) pins: 17
Configuration utility (Windows) to configure the following:
UART/I2C/SPI/JTAG
Driver support for VCOM and DLL
Windows: 10, 8.1, 8,7, Vista, XP, CE
Mac OS-X: 10.6, and later versions
Linux: Kernel version 2.6.35 onwards
Android: Gingerbread and later versions