Littelfuse 1.5KE36CA, Bi-Directional TVS Diode, 1500W, 2-Pin DO-201

View all TVS Diodes

Subtotal (1 reel of 1200 units)*

£270.00

(exc. VAT)

£324.00

(inc. VAT)

Add to Basket
Select or type quantity
Temporarily out of stock
  • Shipping from 12 February 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per unit
Per Reel*
1200 +£0.225£270.00

*price indicative

RS Stock No.:
171-6729
Mfr. Part No.:
1.5KE36CA
Brand:
Littelfuse
Find similar products by selecting one or more attributes.
Select all

Brand

Littelfuse

Direction Type

Bi-Directional

Diode Configuration

Single

Maximum Clamping Voltage

49.9V

Minimum Breakdown Voltage

34.2V

Mounting Type

Through Hole

Package Type

DO-201

Maximum Reverse Stand-off Voltage

30.8V

Pin Count

2

Peak Pulse Power Dissipation

1500W

Maximum Peak Pulse Current

30.5A

ESD Protection

Yes

Number of Elements per Chip

1

Minimum Operating Temperature

-55 °C

Dimensions

5.3 Dia. x 9.5mm

Maximum Operating Temperature

+175 °C

Diameter

5.3mm

Length

9.5mm

Test Current

1mA

Surge Current Rating

200A

Maximum Reverse Leakage Current

1µA

COO (Country of Origin):
CN
The 1.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

1500W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
Glass passivated chip junction in DO-201 Package
Fast response time: typically less than 1.0ps from 0 Volts to BV min
Excellent clamping capability
Typical failure mode is short from over-specified voltage or current
Low incremental surge resistance
Typical IR less than 1μA when VBR min>12V
High temperature to reflow soldering guaranteed: 260°C/40sec / 0.375”,(9.5mm) lead length, 5 lbs., (2.3kg) tension
VBR @ TJ = VBR@25°C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient, typical value is 0.1%)
Plastic package is flammability rated V-0 per Underwriters Laboratories
Matte tin lead–free plated
Halogen free
Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD- 609A.01)

Related links