Snap action bi-metallic disc operates an SPST contact which is electrically isolated from the mounting bracket.
All types reset when the temperature falls to nominally 15° below operating temperature.
• Phenolic body with stainless steel end cap.
• 1/4in tab termination.
• Contacts are rated to 250 Vac 10A with a maximum contact resistance of 50 mΩ.
• Dielectric strength of 2000 Vac.
• N/C types open on temperature rise.
• N/O types close on temperature rise.

UL recognised component, CSA Certified

Use this thermostat switch from Honeywell to maintain a set temperature in your industrial environment. Thanks to its open-on-rise design, the contacts of the thermostat open when the temperature rises to a set point of +40°C. When it drops to +25°C, the contacts close, activating the thermostat to prevent the temperature from dropping further. The switch's housing is made from a robust phenolic material that's resistant to heat for use in harsh environments. You can install this unit in your bimetallic thermostat to regulate the temperature of an enclosed space.

• Automatic reset eliminates the need for manual operation
• Stainless steel end cap is resistant to impact and corrosion
• Wide operating temperature range of 0°C to +150°C for use in hot and cold environments
• Silver and nickel alloy contacts are highly conductive and corrosion-resistant to ensure a reliable connection

• Storage units
• Industrial fans

You can connect this switch to a thermostat using its solder tab terminal. Simply insert pre-stripped connecting wires through the holes on the terminal and use a soldering iron to securely attach them.

Thermal Switches