Eaton Bussmann's offset tag fuses (or offset bolted tag fuses) are essentially a cylindrical fuse that is fitted with offset brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage measure. Eaton Bussmann's fuses are commonly found within a multitude of industrial and switchgear applications, electrical equipment, wiring systems and circuit breakers. This fuse range is suitable for general purpose use.

• The low-temperature rise enables the fuse to be suitable for high-density mounting
• Fuse links, specifically designed for the protection of equipment
• Conforms to industry standards
• Low voltage fuse
• High rupture capacity (HRC)
• Suitable for three-phase applications
• Suitable for type 2 co-ordinated applications as defined in IEC 947-4
• Low power loss, typically 20% lower than the requirements of BS 88

A slotted tag fuse is distinguished by the metal slotted tags that extend off the ends of the fuse. This tag can either enable the fuse to have an offset tag or be centred to the fuse. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage protection measure within electrical circuits.

Installing this Eaton British Standard fuse in your circuit breaker will buffer it against overcurrent or short circuits. Think of it as insurance against potential damage from electrical malfunctions. For extra durability, it's manufactured with innovative fuse technology that means it can absorb voltages up to 415 V AC. Its general-purpose application makes it a versatile choice for industrial, domestic and utility installations. You'll find it used as a safety measure in electrical systems, home appliances, circuit breakers and power-control units.

• Punctured metal blades to securely bolt it in place
• Consumes 20% less power loss than similar alternatives
• Ceramic body keeps it insulated to prevent potential overheating and fire risk

At a voltage rating of 415 V AC, it's at the lower spectrum of voltage resistance and shouldn't be used in installations that require anything above that.

The ceramic nature of this fuse's body helps to keep temperatures low, meaning it can be used in high-density or high-pressure installations.

Eaton formerly known as Bussmann