These PCB mount MOSFET power relays have a maximum switching current of 0.6A and are suitable for switching full and half wave alternating currents.

SSR identical in size to the G6D series (stk no 512-9320 etc) with a max. ac/dc switching current of 0.6A
Suitable for switching full and half-wave alternating current
10μA maximum output leakage current
Output ON resistance: 2.4Ω
2500Vac dielectric strength between input and output
Input resistor and varistor incorporated
Single Phase connection line to neutral
See stk no 376-717 for a suitable PCB socket
Operating temperature range -30 to +85°C

The G3DZ solid State relay is the same size as the G6D with a 0.6 A maximum AC/DC current.

• Isolation Photo-voltage coupler.
• No zero cross function.
• No indicators.
• Rated output load 0.6 A, 5 to 240 v ac, 5 to 100 V dc.
• Rated input voltage 12 V dc
• Operating voltage 9.6 to 14.4 V dc
• Must release voltage 1 V dc min.
• Impedance 2 kΩ +20%.
• Must release voltage 1 V dc.
• Must operate voltage 9.6 V dc maximum.
• Rated load voltage 5 to 240 V ac, 5 to 100 V dc.
• Load voltage range 3 to 264 V ac, 3 to 125 V dc.
• Load current AC = 100 μ to 0.6 A, DC = 10 μ to 0.6 A.
• Inrush current 6 A (10 ms).

• Operate time 6 ms max.
• Release time 10 ms max.
• Output ON-resistance 2.4 Ω max.
• OFF State leakage 10 μ max (125 V dc), 100 μ max (200 V ac).
• Vibration resistance 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude).
• Shock resistance 1000 m/s².
• Weight 3.1 g approx.

• Do not clean or solder the PCB when the Solid State Relay is in the socket.
• Reverse surge voltage – If this is put on the input terminals insert a diode parallel to the input terminal. DO NOT impose a reversed voltage of more than 3 V.
• Terminal material has a high heat induction so any automatic or manual soldering should be achieved with 10 seconds at 260°C.
• Always when fitting a socket ensure it is matched correctly and insert pushing vertically (pressure straight down).

• Part number P6D-04P. Stock number 376717.