Over 800,000 products available

EMERSON – ASCO Solenoid Valve E210D004SCD2, 2 Port, NC, 24V dc

View all Solenoid Valves

Subtotal (1 unit)*

£418.91

(exc. VAT)

£502.69

(inc. VAT)

Add to Basket
Select or type quantity
Stock information currently inaccessible - Please check back later
Units
Per unit
1 +£418.91

*price indicative

RS Stock No.:
488-784
Mfr. Part No.:
E210D004SCD2
Brand:
EMERSON ? ASCO
Find similar products by selecting one or more attributes.
Select all

Brand

EMERSON ? ASCO

Supply Voltage

24V dc

Product Type

Solenoid Valve

Number of Ports

2

Default Valve Position

NC

Outlet Connection Type

Rp (ISO 7/1)

Inlet Thread Standard

Rp (ISO 7/1)

Inlet Connection Type

Rp ISO 7/1

Orifice Diameter

25mm

Body Material

Brass

Application

Air, Inert Gas, Oil, Water

Series

210

Maximum Operating Pressure

9 bar

Outlet Thread Standard

RP

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

75°C

Standards/Approvals

UL, CSA, ATEX Directive 94/9/EC, EN 60529, Pressure Equipment Directive 97/23/EC, EC Directives, IEC 335, ISO 4400 / EN 175301-803

Hazardous Area Certification

ATEX, EC

Maximum Opening Time

120ms

Flow Factor Kv

11.1m³/h

Maximum Closing Time

120ms

RoHS Status: Exempt

Two-Way, Pilot Operated, Minimum Pressure, N/C Valves


Two-way, pilot operated solenoid valves, minimum operating pressure required, normally closed with threaded port connection.

Brass body

Minimum operating pressure required

Compact & lightweight

DIN plug connection

Ranging from -20 to +85°C

Can be mounted in any position

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Note

Pressure ranges are for water and may differ for other media.

Related links