TE Connectivity Transparent Polyolefin Solder Sleeve 42mm Length 6.6 → 10.7mm Cable Diameter
- RS Stock No.:
- 180-8366
- Mfr. Part No.:
- CWT3811
- Brand:
- TE Connectivity
Unavailable
RS will no longer stock this product.
- RS Stock No.:
- 180-8366
- Mfr. Part No.:
- CWT3811
- Brand:
- TE Connectivity
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | TE Connectivity | |
| Minimum Cable Diameter | 6.6mm | |
| Maximum Cable Diameter | 10.7mm | |
| Sleeve Length | 42mm | |
| Material | Polyolefin | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | +125°C | |
| Colour | Transparent | |
| Series | CWT | |
| Standards Met | ANSI J-STD-004, ANSI J-STD-006 | |
| Shrink Temperature | +85°C | |
Select all | ||
|---|---|---|
Brand TE Connectivity | ||
Minimum Cable Diameter 6.6mm | ||
Maximum Cable Diameter 10.7mm | ||
Sleeve Length 42mm | ||
Material Polyolefin | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature +125°C | ||
Colour Transparent | ||
Series CWT | ||
Standards Met ANSI J-STD-004, ANSI J-STD-006 | ||
Shrink Temperature +85°C | ||
Non Compliant
- COO (Country of Origin):
- MX
CWT 38 braided cable terminals
These terminals allow earth tags to be created on shielded cables.
Compatible with numerous dielectric and insulating materials, even those that are heat-sensitive.
The solder connections are insulated, protected and highly resistant to mechanical stress due to the combined use of a fluxed solder ring and a heatshrink sleeve.
Quick and easy-to-use: simply place the terminal and the wire together and heat them using a hot air gun.
The clear sleeve facilitates connection quality control.
These terminals are available with (W1) or without pre-installed earth wire. The 22 AWG multistrand wire is white.
Compatible with numerous dielectric and insulating materials, even those that are heat-sensitive.
The solder connections are insulated, protected and highly resistant to mechanical stress due to the combined use of a fluxed solder ring and a heatshrink sleeve.
Quick and easy-to-use: simply place the terminal and the wire together and heat them using a hot air gun.
The clear sleeve facilitates connection quality control.
These terminals are available with (W1) or without pre-installed earth wire. The 22 AWG multistrand wire is white.
